2003 Honda CBR 600RR vs 2002 Yamaha YZF-600 R6
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | - | 2002 |
| Make Model | - | Yamaha YZF-600 R6 |
| Dimensions |
| Seat Height | 820 mm / 32.3 in. | 830 mm / 32.8 in |
| Wheelbase | - | 1380 mm / 54.4 in |
| Ground Clearance | - | 130 mm / 5.1 in |
| Height | - | 1120 mm / 44.2 in |
| Length | 2,065 mm / 81.3 in. | 2100 mm / 81 in |
| Width | 685 mm / 27.0 in. | 700 mm / 27.6 in |
| Weights & Capacities |
| Dry Weight | 169 kg / 372.6 lbs | 167.5 kg / 369.3 lbs |
| Fuel Capacity | 18.00 litres / 4.76 gallons | 17 Litres / 4.5 US gal |
| Performance |
| Top Speed | - | 262.4 km/h / 163 mph |
| Max Power | - | 120 hp / 87.6 kW @ 13000 rpm |
| Max Torque | - | 68.5 Nm / 50.5 lb-ft @ 11500 rpm |
| Power-to-Weight Ratio | 0.6923 HP/kg | - |
| Standing Start ¼ Mile | - | 10.8 sec |
| Engine |
| Bore x Stroke (in,) | 2.6 x 1.7 inches | - |
| Bore x Stroke (mm) | 67.0 x 42.5 mm | - |
| Displacement (cc) | 599.00 cc | - |
| Stroke | 4 | - |
| Displacement (ci) | 36.55 cubic inches | - |
| Engine Type | In-line four | - |
| Displacement | - | 599 cc / 36.5 cu-in |
| Engine Detail | - | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
| Bore x Stroke | - | 65.5 × 44.5 mm |
| Compression Ratio | - | 12.4:1 |
| Cooling System | - | Liquid cooled |
| Fuel Consumption | - | 18.8 km/lit |
| Fuel Induction | - | 37 mm Keihin CV Downdraft with throttle position sensor |
| Ignition | - | CDI |
| Lubrication | - | Wet sump |
| Starter | - | Electric |
| Drivetrain |
| Clutch | - | Multi-plate |
| Final Drive | Chain | #532 O-ring chain |
| Gearbox | 6-speed | - |
| Transmission / Drive | - | 6 Speed |
| Chassis |
| Frame Type | - | Aluminium, twin spar |
| Suspension - Front | - | 43mm telescopic fork, preload, compression and rebound damping adjustable |
| Suspension - Rear | - | Monoshock piggyback reservoir and adjustable preload, compression and rebound damping adjustable, |
| Rake | - | 25° |
| Trail | - | 96 mm / 3.7 in |
| Wheel Travel - Front | - | 130 mm / 5.1 in |
| Wheel Travel - Rear | - | 120 mm / 4.7 in |
| Wheels & Brakes |
| Brakes - Front | Double disc | 2x 298mm discs 4 piston calipers |
| Brakes - Rear | Single disc | Single 220mm disc 1 piston caliper |
| Tyres - Front | 120/70-17 | 120/60 ZR17 |
| Tyres - Rear | 180/55-17 | 180/55 ZR17 |
Verdict
⚖️
Too close to call
The 2003 Honda CBR 600RR and the 2002 Yamaha YZF-600 R6 are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
2003 Honda CBR 600RR - Advantages
- 💿Dual front discs: Greater stopping power and better heat management under hard braking.
2002 Yamaha YZF-600 R6 - Advantages
- 🌡️Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
2003 Honda CBR 600RR vs 2002 Yamaha YZF-600 R6 - FAQs
What are the engine differences between the 2003 Honda CBR 600RR and 2002 Yamaha YZF-600 R6?
The 2003 Honda CBR 600RR uses In-line four, while the 2002 Yamaha YZF-600 R6 is powered by Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder..
Which should I buy, the 2003 Honda CBR 600RR or the 2002 Yamaha YZF-600 R6?
Both are strong choices. The 2003 Honda CBR 600RR has the edge in dual front discs, while the 2002 Yamaha YZF-600 R6 stands out for liquid cooling. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.