2010 Victory Vegas 8 Ball Specifications

Name: 2010 Victory Vegas 8 Ball
Brand: Victory

Custom / cruiser • Specs last verified 13 July 2026

No images available

Tap to enlarge

2010 Victory Vegas 8 Ball Overview

The 2010 Victory Vegas 8 Ball is a custom / cruiser motorcycle built around 1634 cc of displacement. Under the tank sits a Four stroke, 50° V twin SOHC, 4 valves per cylinder engine, a compression ratio of 9.8:1. From a practical standpoint, the 2010 Vegas 8 Ball tips the scales at 291 kg, carries a 17-litre fuel tank and offers a seat height of 640 mm. That's roughly 9.6 kg lighter than the average custom / cruiser motorcycle in our database. Scroll down for the complete 2010 Victory Vegas 8 Ball spec sheet covering every technical detail from suspension travel to tyre sizes.

2010 Vegas 8 Ball - Pros & Cons

Strengths

Fuel injection: The fuel injectionwith 44mm throttle bodies system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
Accessible seat height: At 640 mm, the seat height is approachable for a wide range of rider heights and builds confidence in low-speed manoeuvring.
Low-maintenance final drive: Carbon Fiber Reinforced Belt final drive means no chain to clean, lube or adjust - meaningfully less routine maintenance than a chain-driven equivalent.

Considerations

Age-related wear: As with any used Vegas 8 Ball, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Wear Points & Servicing Notes

Heat management in traffic

Vegas 8 Ball's air-cooled design means engine-bay temperatures build up more in stop-start traffic than on a liquid-cooled equivalent - a function of the cooling method itself, not a defect. Mesh riding gear and avoiding prolonged idling help in hot climates.

Fuelling & injector care

Fuelling comes from fuel injectionwith 44mm throttle bodies. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.

Suspension condition on used examples

Up front, the Vegas 8 Ball runs 43mm Inverted cartridge telescopic fork, 130mm wheel travel and Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by belt - lower maintenance than chain with no lubrication needed, but tension and tooth wear should still be checked at service intervals.

Handling the weight at a standstill

At 291 kg, the Vegas 8 Ball is a substantial machine - low-speed manoeuvring in car parks takes more physical effort than on a lighter bike, though the weight disappears once rolling.

Vegas 8 Ball - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2010 Victory Vegas 8 Ball, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained Vegas 8 Ball should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any Vegas 8 Ball. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The Vegas 8 Ball's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

2010 Victory Vegas 8 Ball - Frequently Asked Questions

What engine does the 2010 Victory Vegas 8 Ball have?

The 2010 Victory Vegas 8 Ball uses a Four stroke, 50° V twin SOHC, 4 valves per cylinder engine with 1634 cc of displacement. It is air / oil.

How much does the 2010 Victory Vegas 8 Ball weigh?

The 2010 Victory Vegas 8 Ball weighs 291 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2010 Victory Vegas 8 Ball?

The 2010 Victory Vegas 8 Ball has a 17-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 283-340 km between stops.

Is the 2010 Victory Vegas 8 Ball suitable for shorter riders?

The 2010 Victory Vegas 8 Ball has a seat height of 640 mm. This is a comfortable, accessible height for most riders.

What brakes does the 2010 Victory Vegas 8 Ball have?

The 2010 Victory Vegas 8 Ball uses Single 300mm floating rotor 4 piston caliper at the front and Single 300mm floating rotor 2 piston caliper at the rear.

What tyre sizes does the 2010 Victory Vegas 8 Ball use?

The 2010 Victory Vegas 8 Ball runs 80/90 -21 front and 180/55 R18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2010 Victory Vegas 8 Ball have?

The 2010 Victory Vegas 8 Ball is fitted with a 6 Speed transmission.

Victory Vegas 8 Ball Spec Evolution

The Victory Vegas 8 Ball was produced across 3 model years (2006-2010). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2006	2008	2010
Dry Weight	280 kg / 617 lbs	291 kg / 645 lbs	291 kg / 645 lbs
Engine Detail	Four stroke, 50° V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters	Four stroke, 50° V twin SOHC, 4 valves per cylinder	Four stroke, 50° V twin SOHC, 4 valves per cylinder
Displacement	1507 cc / 91.9 cu-in	1634 cc / 100 cu-in	1634 cc / 100 cu-in
Suspension - Front	43mm Conventional telescopic fork, 130mm wheel travel	43mm Inverted cartridge telescopic fork, 130mm wheel travel	43mm Inverted cartridge telescopic fork, 130mm wheel travel
Bore x Stroke	97 x 102 mm	101 x 102 mm	101 x 102 mm
Compression Ratio	9.2:1	9.8:1	9.8:1
Cooling System	Air/oil cooled	Air / oil	Air / oil
Tyres - Front	80/90-21	80/90 -21	80/90 -21

Key Specifications

Engine

Four stroke, 50° V twin SOHC, 4 valves per cylinder

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

291 kg / 645 lbs

Fuel Capacity

17 Litres / 4.5 US gal

Full 2010 Victory Vegas 8 Ball Specifications

Year 2009 - 10

Make Model Victory Vegas 8 Ball

Seat Height 640 mm / 25.2 i

Dry Weight 291 kg / 645 lbs

Fuel Capacity 17 Litres / 4.5 US gal

Maximum Load / GVWR 522 kg / 151 lbs

Displacement 1634 cc / 100 cu-in

Engine Detail Four stroke, 50° V twin SOHC, 4 valves per cylinder

Bore x Stroke 101 x 102 mm

Compression Ratio 9.8:1

Cooling System Air / oil

Fuel Induction Electronic Fuel Injection with 44mm throttle bodies

Starter Electric

Battery Capacity 12 volts / 18 amp hours

Clutch Wet, multi-plate

Final Drive Carbon Fiber Reinforced Belt

Transmission / Drive 6 Speed

Suspension - Front 43mm Inverted cartridge telescopic fork, 130mm wheel travel

Suspension - Rear Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring

Brakes - Front Single 300mm floating rotor 4 piston caliper

Brakes - Rear Single 300mm floating rotor 2 piston caliper

Tyres - Front 80/90 -21

Tyres - Rear 180/55 R18

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.