2007 Victory Hammer Specifications

Name: 2007 Victory Hammer
Brand: Victory

No images available

Tap to enlarge

2007 Victory Hammer Overview

The 2007 Victory Hammer is a custom / cruiser motorcycle built around 1634 cc of displacement. Under the tank sits a Four stroke, 50° V twin SOHC, 4 valves per cylinder engine, a compression ratio of 9.8:1. From a practical standpoint, the 2007 Hammer tips the scales at 305 kg, carries a 17-litre fuel tank, offers a seat height of 660 mm and spans a 1669 mm wheelbase. Scroll down for the complete 2007 Victory Hammer spec sheet covering every technical detail from suspension travel to tyre sizes.

2007 Hammer - Pros & Cons

Strengths

Accessible seat height: At 660 mm, the seat height is approachable for a wide range of rider heights and builds confidence in low-speed manoeuvring.

Considerations

Age-related wear: As with any used Hammer, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Owner Experiences & Common Issues

Low-speed confidence

At 305 kg, the Hammer is a substantial machine. New owners occasionally mention that slow-speed manoeuvring in car parks takes a little getting used to. Once moving, the weight disappears - but practising slow-speed exercises builds confidence quickly.

Hammer - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2007 Victory Hammer, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained Hammer should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any Hammer. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

2007 Victory Hammer - Frequently Asked Questions

What engine does the 2007 Victory Hammer have?

The 2007 Victory Hammer uses a Four stroke, 50° V twin SOHC, 4 valves per cylinder engine with 1634 cc of displacement. It is air / oil.

How much does the 2007 Victory Hammer weigh?

The 2007 Victory Hammer weighs 305 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2007 Victory Hammer?

The 2007 Victory Hammer has a 17-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 283-340 km between stops.

Is the 2007 Victory Hammer suitable for shorter riders?

The 2007 Victory Hammer has a seat height of 660 mm. This is a comfortable, accessible height for most riders.

What brakes does the 2007 Victory Hammer have?

The 2007 Victory Hammer uses 2x 300mm floating rotor 4 piston caliper at the front and Single 300mm floating rotor 2 piston caliper at the rear.

What tyre sizes does the 2007 Victory Hammer use?

The 2007 Victory Hammer runs 130/70 R18 front and 250/40 R18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2007 Victory Hammer have?

The 2007 Victory Hammer is fitted with a 6 Speed transmission.

Key Specifications

Engine

Four stroke, 50° V twin SOHC, 4 valves per cylinder

Power

N/A

Torque

N/A

Top Speed

N/A

Weight

305 kg / 672 lbs

Fuel Capacity

17 Litres / 4.5 US gal

Full 2007 Victory Hammer Specifications

Year 2007 - 08

Make Model Victory Hammer

Displacement 1634 cc / 100 cu-in

Engine Detail Four stroke, 50° V twin SOHC, 4 valves per cylinder

Bore x Stroke 101 x 102 mm

Compression Ratio 9.8:1

Cooling System Air / oil

Fuel Induction Electronic Fuel Injection with 44mm throttle bodies

Starter Electric

Compare Victory Hammer

See how the 2007 Victory Hammer stacks up against similar motorcycles.

Build your own comparison →

Explore More

All Victory models All Hammer years More Custom / cruiser All 2007 motorcycles

Victory Hammer - other years

All Victory models Custom / cruiser Compare bikes