2007 Vespa GTV 250ie Specifications

Scooter • Specs last verified 13 July 2026

No images available
Tap to enlarge

2007 Vespa GTV 250ie Overview

For 2007, Vespa offers the GTV 250ie as a scooter motorcycle with 244 cc on tap. The 2007 Vespa GTV 250ie is built around a Single cylinder engine running SOHC valve actuation. Internally, bore and stroke are 72 x 60 mm. Out on the road, the GTV 250ie delivers 20.20 of torque. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2007 Vespa GTV 250ie spec sheet below.

2007 GTV 250ie - Pros & Cons

Strengths

  • Factory engineering: There's nothing exotic about the 2007 Vespa GTV 250ie's spec sheet - just solid, proven engineering for what it's meant to do.

Considerations

  • Age-related wear: No particular mechanical concern flags for the GTV 250ie - condition on any used example comes down to how well it's been looked after.

Wear Points & Servicing Notes

Valve clearance checks

Valve clearances on SOHC-equipped engines like the GTV 250ie's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Single disc up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by Single arm, dual-chamber hydraulic shock absorber with co-axial spring up front and Two dual-effect shock absorbers with adjustable preload at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Frame & chassis check

The Pressed sheet metal frame with welded reinforcements chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

GTV 250ie - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2007 Vespa GTV 250ie should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept GTV 250ie settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a GTV 250ie's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a GTV 250ie's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2007 Vespa GTV 250ie - Frequently Asked Questions

What engine does the 2007 Vespa GTV 250ie have?
The 2007 Vespa GTV 250ie uses a Single cylinder engine with 244 cc of displacement.
How much does the 2007 Vespa GTV 250ie weigh?
The 2007 Vespa GTV 250ie weight is listed in the full spec table below.
How much power does the 2007 Vespa GTV 250ie make?
The 2007 Vespa GTV 250ie produces 20.20 of torque.
What brakes does the 2007 Vespa GTV 250ie have?
The 2007 Vespa GTV 250ie uses Single disc at the front and Single disc at the rear.
What tyre sizes does the 2007 Vespa GTV 250ie use?
The 2007 Vespa GTV 250ie runs 120/70-12 front and 130/70-12 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What suspension does the 2007 Vespa GTV 250ie have?
The 2007 Vespa GTV 250ie uses Single arm, dual-chamber hydraulic shock absorber with co-axial spring up front and Two dual-effect shock absorbers with adjustable preload at the rear.
What frame does the 2007 Vespa GTV 250ie use?
The 2007 Vespa GTV 250ie is built around a Pressed sheet metal frame with welded reinforcements frame.

Vespa GTV 250ie Spec Evolution

The Vespa GTV 250ie was produced across 2 model years (2007-2009). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2007 2009
Displacement (cc) 244.00 cc 259.00 cc
Displacement (ci) 14.89 cubic inches 15.80 cubic inches
Clutch Automatic centrifugal dry clutch with dampers Automatic dry, centrifugal type
Engine Lubrication Wet sump, chain-driven lobe pump Wet sump, chain-driven lobe pump, filtration during aspiration and discharge
Tyres - Rear 130/70-12 120/70-12

Key Specifications

Engine

Single cylinder

Power

Not published by manufacturer

Torque

20.20

Top Speed

Not published by manufacturer

Weight

Not published by manufacturer

Fuel Capacity

Not published by manufacturer

Advertisement

Full 2007 Vespa GTV 250ie Specifications

Max Torque 20.20
Bore x Stroke (in,) 2.8 x 2.4 inches
Bore x Stroke (mm) 72.0 x 60.0 mm
Displacement (cc) 244.00 cc
Displacement (ci) 14.89 cubic inches
Engine Type Single cylinder
Fuel Control SOHC
Stroke 4
Engine Lubrication Wet sump, chain-driven lobe pump
Valve System 4
Clutch Automatic centrifugal dry clutch with dampers
Frame Type Pressed sheet metal frame with welded reinforcements
Suspension - Front Single arm, dual-chamber hydraulic shock absorber with co-axial spring
Suspension - Rear Two dual-effect shock absorbers with adjustable preload
Brakes - Front Diameter (in.) 8.7 inches
Brakes - Front Diameter (mm) 220 mm
Brakes - Rear Diameter (in.) 8.7 inches
Brakes - Rear Diameter (mm) 220 mm
Brakes - Front Single disc
Brakes - Rear Single disc
Tyres - Front 120/70-12
Tyres - Rear 130/70-12

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement

Compare Vespa GTV 250ie

See how the 2007 Vespa GTV 250ie stacks up against similar motorcycles.

Build your own comparison →

Vespa GTV 250ie - other years