2026 Triumph Scrambler Specifications

Name: 2026 Triumph Scrambler
Brand: Triumph

Naked bike • Specs last verified 13 July 2026

No images available

Tap to enlarge

2026 Triumph Scrambler Overview

For 2026, Triumph offers the Scrambler as a naked bike motorcycle with 900 cc on tap. The 2026 Triumph Scrambler is built around a Four stroke, 270° crank angle parallel twin, SOHC, 4 valves per cylinder engine, a compression ratio of 11.0:1. Out on the road, the Scrambler delivers 47.8 kW @ 7250 rpm of peak power and 80 Nm @ 3250 rpm of torque. In everyday use, the 2026 Scrambler tips the scales at 221 kg, carries a 12-litre fuel tank, offers a seat height of 790 mm and spans a 1445 mm wheelbase. That's roughly 12.5 kg heavier than the average naked bike motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2026 Triumph Scrambler spec sheet below.

2026 Scrambler - Pros & Cons

Strengths

Strong power output: Peak output on the Scrambler is 47.8 kW @ 7250 rpm and 80 Nm @ 3250 rpm of torque - strong numbers for what it is.
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.

Considerations

Modest fuel capacity: A 12-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Fuelling & injector care

Fuelling on the Scrambler comes from Multipoint sequential electronic fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Brake disc and pad wear

Single Ø320mm floating disc, four-piston radial caliper, OCABS up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by Showa ø43mm upside-down forks up front and Twin Showa RSUs with external reservoirs and adjustable preload at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the Scrambler means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Tubular steel with twin cradles chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Handling the weight at a standstill

The Scrambler's 221 kg kerb weight is worth factoring into how you handle it at a standstill - parking-lot manoeuvres need a bit more deliberate technique than on a lighter machine.

Scrambler - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2026 Triumph Scrambler should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept Scrambler settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a Scrambler's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the Scrambler's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

2026 Triumph Scrambler - Frequently Asked Questions

What engine does the 2026 Triumph Scrambler have?

The 2026 Triumph Scrambler uses a Four stroke, 270° crank angle parallel twin, SOHC, 4 valves per cylinder engine with 900 cc of displacement. It is liquid cooled.

How much does the 2026 Triumph Scrambler weigh?

The 2026 Triumph Scrambler weighs 221 kg. This is the manufacturer's wet figure.

How much power does the 2026 Triumph Scrambler make?

The 2026 Triumph Scrambler produces 47.8 kW @ 7250 rpm of power and 80 Nm @ 3250 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2026 Triumph Scrambler?

The 2026 Triumph Scrambler has a 12-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 200-240 km between stops.

Is the 2026 Triumph Scrambler suitable for shorter riders?

The 2026 Triumph Scrambler has a seat height of 790 mm. This is a moderate seat height that suits a wide range of rider heights.

What brakes does the 2026 Triumph Scrambler have?

The 2026 Triumph Scrambler uses Single Ø320mm floating disc, four-piston radial caliper, OCABS at the front and Single Ø255mm fixed disc, Nissin two-piston floating caliper, OCABS at the rear.

What tyre sizes does the 2026 Triumph Scrambler use?

The 2026 Triumph Scrambler runs 100/90-19 front and 150/70 R17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2026 Triumph Scrambler have?

The 2026 Triumph Scrambler is fitted with a 5-Speed transmission.

Triumph Scrambler Spec Evolution

The Triumph Scrambler was produced across 12 model years (2006-2026). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2006	2007	2008	2009	2010	2011	2012	2013	2014	2016	2018	2026
Max Power	44.1 kW / 54 hp @ 7000 rpm	44.1 kW / 54 hp @ 7000 rpm	44.1 kW / 54 hp @ 7000 rpm	44.1 kW / 54 hp @ 7000 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	44.1 kW / 59 hp @ 6800 rpm	47.8 kW / 64.1 hp @ 7250 rpm
Engine Detail	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, parallel-twin, DOHC	Four stroke, 270° crank angle parallel twin, SOHC, 4 valves per cylinder
Seat Height	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5in	825 mm / 32.5 in	790 mm / 31.1 in
Fuel Capacity	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	16.6 Litres / 4.4 US gal / 3.7 Imp gal	12 Litres / 3.2 US gal
Displacement	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	865 cc / 52.8 cu in	900 cc / 54.9 cu-in
Frame Type	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel cradle	Tubular steel with twin cradles
Brakes - Front	Single 310 mm disc, 2 piston caliper	Single 310 mm disc, 2 piston caliper	Single 310 mm disc, 2 piston caliper	Single 310 mm disc, 2 piston caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single 310 mm disc, Nissen 2 piston floating caliper	Single Ø320mm floating disc, four-piston radial caliper, OCABS
Wheelbase	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500mm / 59.0in	1500 mm / 59.0 in	1445 mm / 56.9 in

Key Specifications

Engine

Four stroke, 270° crank angle parallel twin, SOHC, 4 valves per cylinder

Power

47.8 kW / 64.1 hp @ 7250 rpm

Torque

80 Nm / 59 lb-ft @ 3250 rpm

Top Speed

Not published by manufacturer

Weight

221 kg / 487 lbs

Fuel Capacity

12 Litres / 3.2 US gal

Full 2026 Triumph Scrambler Specifications

Year 2026

Make Model Triumph Scrambler

Seat Height 790 mm / 31.1 in

Wheelbase 1445 mm / 56.9 in

Height 1178 mm / 46.4 in (without mirrors)

Length 2111 mm / 83.1 in

Width 853 mm / 33.6 in

Fuel Capacity 12 Litres / 3.2 US gal

Wet Weight 221 kg / 487 lbs

Max Power 47.8 kW / 64.1 hp @ 7250 rpm

Max Torque 80 Nm / 59 lb-ft @ 3250 rpm

Displacement 900 cc / 54.9 cu-in

Engine Detail Four stroke, 270° crank angle parallel twin, SOHC, 4 valves per cylinder

Bore x Stroke 84.6 x 80 mm

Compression Ratio 11.0:1

Cooling System Liquid cooled

Emissions Euro 5+

Exhaust Brushed stainless steel 2-into-2 exhaust system with twin high-level brushed stainless steel silencers

Fuel Induction Multipoint sequential electronic fuel injection, ride by wire, three riding modes

Ignition Digital

Lubrication Wet sump

Starter Electric

Clutch Wet, multi-plate, slip & assist

Final Drive X ring chain

Transmission / Drive 5-Speed

Frame Type Tubular steel with twin cradles

Suspension - Front Showa ø43mm upside-down forks

Suspension - Rear Twin Showa RSUs with external reservoirs and adjustable preload

Rake 25.8°

Swingarm Twin-sided, fabricated aluminium

Trail 112 mm / 4.4 in

Wheel Travel - Front 120 mm / 4.7 in

Wheel Travel - Rear 120 mm / 4.7 in

Instrumentation LCD multi-function instruments with integrated colour TFT screen

Brakes - Front Single Ø320mm floating disc, four-piston radial caliper, OCABS

Brakes - Rear Single Ø255mm fixed disc, Nissin two-piston floating caliper, OCABS

ABS Standard

Rims - Front 2.5 x 19

Rims - Rear 4.25 x 17

Tyres - Front 100/90-19

Tyres - Rear 150/70 R17

Wheels Spoked, aluminium rim, 32-spoke

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.