![]()
No images available
Tap to enlarge
![]()
2007 Kawasaki Z 750 Overview
The 2007 Kawasaki Z 750 is a naked bike motorcycle built around 748 cc of displacement. Under the tank sits an In-line four engine running DOHC valve actuation, a compression ratio of 11.3:1. 2007 Kawasaki Z 750 delivers 77.7 kW @ 10500 rpm of peak power and 78 Nm @ 8300 rpm of torque. The factory-quoted top speed stands at 233.1 km/h, making it a capable performer in its class. From a practical standpoint, the 2007 Z 750 tips the scales at 207 kg, carries a 18.5-litre fuel tank, offers a seat height of 815 mm and spans a 1440 mm wheelbase. Scroll down for the complete 2007 Kawasaki Z 750 spec sheet covering every technical detail from suspension travel to tyre sizes.
2007 Z 750 - Pros & Cons
Strengths
-
⚡
Strong power output: 2007 Kawasaki Z 750 makes 77.7 kW @ 10500 rpm with 78 Nm @ 8300 rpm of torque - competitive figures for its class.
-
🔧
Fuel injection: The fuel injection: Ø 32 mm x 4 (Keihin) with oval sub-throttles system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
-
⛽
Large fuel range: The 18.5-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.
Considerations
-
⚙️
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.
Wear Points & Servicing Notes
Cooling system servicing
The Liquid cooled system on the Z 750 needs a coolant change roughly every two years (or per the service schedule) - skipping it lets the coolant turn acidic and corrode the aluminium water passages over time.
Fuelling & injector care
Fuelling comes from fuel injection: Ø 32 mm x 4 (Keihin) with oval sub-throttles. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.
Valve clearance checks
DOHC valve actuation on the Z 750 means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.
Brake disc and pad wear
The 2x 300mm discs 2 piston caliper front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.
Suspension condition on used examples
Up front, the Z 750 runs 41mm telescopic forks and Bottom link, Uni-Trak, 4-way rebound adjustment, 7-way preload at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.
Final drive maintenance
Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.
Frame & chassis check
The frame is Tubular backbone (with engine sub-frame), high-tensile steel - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.
Z 750 - Buying & Maintenance Guide
What to check before buying
When inspecting a used 2007 Kawasaki Z 750, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained Z 750 should fire up cleanly and settle to a smooth idle within a few seconds.
Oil and filter changes
Regular oil changes are the single most important maintenance task on any Z 750. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.
Fuel system care
The Z 750's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.
Valve clearance service
Check that valve clearances have been adjusted at the correct intervals on any used Z 750. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.
2007 Kawasaki Z 750 - Frequently Asked Questions
What engine does the 2007 Kawasaki Z 750 have?
The 2007 Kawasaki Z 750 uses an In-line four engine with 748 cc of displacement. It is liquid cooled.
What is the top speed of the 2007 Kawasaki Z 750?
The 2007 Kawasaki Z 750 has a factory-quoted top speed of 233.1 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2007 Kawasaki Z 750 weigh?
The 2007 Kawasaki Z 750 weighs 207 kg. This is the manufacturer's dry figure.
How much power does the 2007 Kawasaki Z 750 make?
The 2007 Kawasaki Z 750 produces 77.7 kW @ 10500 rpm of power and 78 Nm @ 8300 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2007 Kawasaki Z 750?
The 2007 Kawasaki Z 750 has a 18.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 308-370 km between stops.
Is the 2007 Kawasaki Z 750 suitable for shorter riders?
The 2007 Kawasaki Z 750 has a seat height of 815 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2007 Kawasaki Z 750 have?
The 2007 Kawasaki Z 750 uses 2x 300mm discs 2 piston caliper at the front and Single 200mm disc 1 piston caliper at the rear.
What tyre sizes does the 2007 Kawasaki Z 750 use?
The 2007 Kawasaki Z 750 runs 120/70 -17 front and 180/55 -17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2007 Kawasaki Z 750 have?
The 2007 Kawasaki Z 750 is fitted with a 6 Speed transmission.
Kawasaki Z 750 Spec Evolution
The Kawasaki Z 750 was produced across 8 model years (1980-2012). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
1980 |
1981 |
2005 |
2006 |
2008 |
2010 |
2011 |
2012 |
| Max Power |
- |
- |
110 hp / 81 kW @ 110000 rpm |
110 hp / 81 kW @ 110000 rpm |
77.7 kW / 106 hp @ 10500 rpm |
77.7 kW / 106 hp @ 10500 rpm |
- |
- |
| Wet Weight |
226.0 kg / 498.2 lbs |
- |
- |
- |
- |
226.0 kg / 498.2 lbs |
292.1 kg / 643.9 lbs |
292.1 kg / 643.9 lbs |
| Dry Weight |
- |
- |
195 kg / 430 lbs |
195 kg / 430 lbs |
207 kg / 456.4 lbs |
226 kg / 498.2 lbs |
226 kg / 498.2 lbs |
226 kg / 498.2 lbs |
| Engine Type |
In-line four |
In-line six, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
| Top Speed |
201.0 km/h / 124.9 mph |
- |
233.1 km/h / 144.7 mph |
233.1 km/h / 144.7 mph |
233.1 km/h |
233.1 km/h |
- |
- |
| Seat Height |
- |
- |
815 mm / 32.1 in |
815 mm / 32.1 in |
815 mm / 32.1 in. |
815 mm / 32.1 in. |
815 mm / 32.1 in. |
815 mm / 32.1 in. |
| Fuel Capacity |
22.00 litres / 5.81 gallons |
- |
18 Litres / 4.8 US gal |
18 Litres / 4.8 US gal |
18.5 Litres / 4.8 US gal |
18.5 Litres / 4.8 US gal |
18.50 litres / 4.89 gallons |
18.50 litres / 4.89 gallons |
| Displacement (ci) |
45.09 cubic inches |
44.91 cubic inches |
- |
- |
45.64 cubic inches |
45.64 cubic inches |
45.64 cubic inches |
45.64 cubic inches |
Key Specifications
Power
77.7 kW / 106 hp @ 10500 rpm
Torque
78 Nm / 8.0 kg-fm @ 8300 rpm
Weight
207.0 kg / 456.4 lbs
Fuel Capacity
18.5 Litres / 4.8 US gal
Advertisement
Full 2007 Kawasaki Z 750 Specifications
Year
2007 - 08
Colours
Black, Silver, Green
Make Model
Kawasaki Z 750
Ground Clearance (mm)
155 mm
Ground Clearance (in.)
6.1 inches
Seat Height
815 mm / 32.1 in
Wheelbase
1440 mm / 56.7 in
Ground Clearance
155 mm / 6.1 in
Height
1100 mm / 43.3 in
Length
2085 mm / 82.1 in
Width
805 mm / 31.7 in
Weight balance - Rear
49.0
Weight balance - Front
51.0
Dry Weight
207.0 kg / 456.4 lbs
Fuel Capacity
18.5 Litres / 4.8 US gal
Stroke
4
Fuel Control
DOHC
Engine Type
In-line four
Displacement
748 cc / 45.6 cu-in
Engine Detail
Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Fuel System
Injection. Keihin 32mm x 4
Bore x Stroke
68.4 x 50.9 mm
Compression Ratio
11.3:1
Cooling System
Liquid cooled
Engine Lubrication
Wet Sump
Exhaust
4-1 exhaust system
Fuel Consumption
19.2 km/lit
Fuel Induction
Fuel injection: Ø 32 mm x 4 (Keihin) with oval sub-throttles
Ignition
Digital
Starter
Electric
Valve System
4
Clutch
Multiple wet plate manual
Final Drive
Chain
Gearbox
6-speed
Transmission / Drive
6 Speed
Frame Type
Tubular backbone (with engine sub-frame), high-tensile steel
Suspension - Front
41mm telescopic forks
Suspension - Rear
Bottom link, Uni-Trak, 4-way rebound adjustment, 7-way preload
Rake
24.5°
Trail
103 mm / 4.1 in
Wheel Travel - Front
120 mm / 4.7 in
Wheel Travel - Rear
124 mm / 4.9 in
Brakes - Front Diameter (in.)
11.8 inches
Brakes - Front Diameter (mm)
300 mm
Brakes - Rear Diameter (in.)
9.8 inches
Brakes - Rear Diameter (mm)
250 mm
Brakes - Front
2x 300mm discs 2 piston caliper
Brakes - Rear
Single 200mm disc 1 piston caliper
Tyres - Front
120/70 -17
Tyres - Rear
180/55 -17
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement