2009 Kawasaki VN 2000 Vulcan Specifications

Name: 2009 Kawasaki VN 2000 Vulcan
Brand: Kawasaki

Custom / cruiser • Specs last verified 13 July 2026

No images available

Tap to enlarge

2009 Kawasaki VN 2000 Vulcan Overview

Kawasaki VN 2000 Vulcan is a custom / cruiser motorcycle, displacing 2053 cc. Power comes from a Four stroke, V-twin cylinder, DOHC, 4 valve per cylinder engine, a compression ratio of 9.5:1. On the performance side, it delivers 103 hp @ 4800 rpm of peak power and 177 Nm @ 3200 rpm of torque. Top speed is factory-quoted at 200.4 km/h. On the road, the 2009 VN 2000 Vulcan tips the scales at 332 kg, carries a 20.8-litre fuel tank and offers a seat height of 690 mm. That's roughly 31.4 kg heavier than the average custom / cruiser motorcycle in our database. The full 2009 Kawasaki VN 2000 Vulcan spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2009 VN 2000 Vulcan - Pros & Cons

Strengths

Strong power output: With 103 hp @ 4800 rpm and 177 Nm @ 3200 rpm of torque on tap, the VN 2000 Vulcan is no slouch for its class.
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
Accessible seat height: A 690 mm seat height keeps this manageable for most riders, which helps confidence at parking-lot speeds.
Large fuel range: A 20.8-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.
Low-maintenance final drive: Running Belt final drive cuts out the regular chain cleaning and tensioning that most bikes need.

Considerations

Age-related wear: Nothing specific stands out as a weak point on the VN 2000 Vulcan - the usual used-bike checks (service history, consumables, tyres) apply.

Wear Points & Servicing Notes

Cooling system servicing

VN 2000 Vulcan's Liquid cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Fuelling & injector care

The fuel injection on the VN 2000 Vulcan needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.

Brake disc and pad wear

Braking up front comes from 2x 300mm discs 4 piston calipers - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The VN 2000 Vulcan's suspension runs 49 mm telescopic fork at the front. The rear uses Swingarm with mono-shock, rebound damping 8-way Spring preload adjustable. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The VN 2000 Vulcan runs belt final drive: no lubrication or frequent adjustment like a chain, though belt tension and wear are worth a periodic look.

Frame & chassis check

Built around a Double-cradle, high-tensile steel, the VN 2000 Vulcan's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

Handling the weight at a standstill

332 kg puts the VN 2000 Vulcan toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.

VN 2000 Vulcan - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2009 Kawasaki VN 2000 Vulcan, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy VN 2000 Vulcan should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a VN 2000 Vulcan's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Fuel system care

Fuel injection on the VN 2000 Vulcan needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.

2009 Kawasaki VN 2000 Vulcan - Frequently Asked Questions

What engine does the 2009 Kawasaki VN 2000 Vulcan have?

The 2009 Kawasaki VN 2000 Vulcan uses a Four stroke, V-twin cylinder, DOHC, 4 valve per cylinder engine with 2053 cc of displacement. It is liquid cooled.

What is the top speed of the 2009 Kawasaki VN 2000 Vulcan?

The 2009 Kawasaki VN 2000 Vulcan has a factory-quoted top speed of 200.4 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.

How much does the 2009 Kawasaki VN 2000 Vulcan weigh?

The 2009 Kawasaki VN 2000 Vulcan weighs 332 kg. This is the manufacturer's dry figure.

How much power does the 2009 Kawasaki VN 2000 Vulcan make?

The 2009 Kawasaki VN 2000 Vulcan produces 103 hp @ 4800 rpm of power and 177 Nm @ 3200 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2009 Kawasaki VN 2000 Vulcan?

The 2009 Kawasaki VN 2000 Vulcan has a 20.8-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 346-416 km between stops.

Is the 2009 Kawasaki VN 2000 Vulcan suitable for shorter riders?

The 2009 Kawasaki VN 2000 Vulcan has a seat height of 690 mm. This is a comfortable, accessible height for most riders.

What brakes does the 2009 Kawasaki VN 2000 Vulcan have?

The 2009 Kawasaki VN 2000 Vulcan uses 2x 300mm discs 4 piston calipers at the front and Single 320mm disc 2 piston caliper at the rear.

What tyre sizes does the 2009 Kawasaki VN 2000 Vulcan use?

The 2009 Kawasaki VN 2000 Vulcan runs 150/80 R16 front and 200/60 R16 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2009 Kawasaki VN 2000 Vulcan have?

The 2009 Kawasaki VN 2000 Vulcan is fitted with a 5 Speed transmission.

Key Specifications

Engine

Four stroke, V-twin cylinder, DOHC, 4 valve per cylinder

Power

103 hp / 76 kW @ 4800 rpm

Torque

177 Nm / 130.5 lb-ft @ 3200 rpm

Top Speed

200.4 km/h / 124.5 mph

Weight

332 kg / 732 lbs

Fuel Capacity

20.8 Litres / 5.5 US gal

Full 2009 Kawasaki VN 2000 Vulcan Specifications

Year 2008 - 09

Make Model Kawasaki VN 2000 Vulcan

Seat Height 690 mm / 26.8 in

Ground Clearance 135 mm / 5.3 in

Length 2535 mm / 99.8 in

Dry Weight 332 kg / 732 lbs

Fuel Capacity 20.8 Litres / 5.5 US gal

Top Speed 200.4 km/h / 124.5 mph

Max Power 103 hp / 76 kW @ 4800 rpm

Max Torque 177 Nm / 130.5 lb-ft @ 3200 rpm

Standing Start ¼ Mile 13.4 sec

Displacement 2053 cc / 125 cu-in

Engine Detail Four stroke, V-twin cylinder, DOHC, 4 valve per cylinder

Bore x Stroke 103 x 123.2 mm

Compression Ratio 9.5:1

Cooling System Liquid cooled

Fuel Consumption 18.1 km/lit

Fuel Induction Electronic fuel injection, 46mm throttle bodies

Ignition Digital

Starter Electric

Clutch Wet multi-disc, manual

Final Drive Belt

Gear Ratios 1st 2.550 (51/20) 2nd 1.630 (44/27) 3rd 1.219 (39/32) 4th 0.939 (31/33) 5th 0.730 (27/37)

Transmission / Drive 5 Speed

Frame Type Double-cradle, high-tensile steel

Suspension - Front 49 mm telescopic fork.

Suspension - Rear Swingarm with mono-shock, rebound damping 8-way Spring preload adjustable

Rake 32.0°

Trail 182 mm

Wheel Travel - Front 150 mm / 5.9 in

Wheel Travel - Rear 100 mm / 3.9 in

Brakes - Front 2x 300mm discs 4 piston calipers

Brakes - Rear Single 320mm disc 2 piston caliper

Tyres - Front 150/80 R16

Tyres - Rear 200/60 R16

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.