2023 Husqvarna TE 250 Heritage Specifications

Name: 2023 Husqvarna TE 250 Heritage
Brand: Husqvarna

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2023 Husqvarna TE 250 Heritage Overview

Husqvarna TE 250 Heritage is an enduro / off-road motorcycle, displacing 249 cc. Power comes from a Single cylinder, two-stroke engine. Bore and stroke come in at 66.4 x 72 mm. On the road, the 2023 TE 250 Heritage tips the scales at 106.2 kg, carries a 8.50-litre fuel tank, offers a seat height of 950 mm and spans a 1482 mm wheelbase. That's roughly 92.6 kg lighter than the average enduro / off-road motorcycle in our database. The full 2023 Husqvarna TE 250 Heritage spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2023 TE 250 Heritage - Pros & Cons

Strengths

Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.

Considerations

Tall seat height: At 950 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
Modest fuel capacity: Range between stops is limited by the 8.50-litre tank - plan fuel stops accordingly on longer routes.
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.

Wear Points & Servicing Notes

Fuelling & injector care

The fuel injection on the TE 250 Heritage needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.

Brake disc and pad wear

Braking up front comes from Single disc. Twin-piston floating calliper, brake disc - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The TE 250 Heritage's suspension runs WP XPLOR-USD, Ø 48 mm at the front. The rear uses WP XACT Monoshock with linkage. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The TE 250 Heritage uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.

Frame & chassis check

Built around a Central double-cradle-type 25CrMo4 steel, the TE 250 Heritage's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

Low-speed handling

106.2 kg keeps the TE 250 Heritage easy to move around in tight spaces, car parks and on the stand alike.

TE 250 Heritage - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2023 Husqvarna TE 250 Heritage, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy TE 250 Heritage should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a TE 250 Heritage's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Fuel system care

Fuel injection on the TE 250 Heritage needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.

2023 Husqvarna TE 250 Heritage - Frequently Asked Questions

What engine does the 2023 Husqvarna TE 250 Heritage have?

The 2023 Husqvarna TE 250 Heritage uses a Single cylinder, two-stroke engine with 249 cc of displacement.

How much does the 2023 Husqvarna TE 250 Heritage weigh?

The 2023 Husqvarna TE 250 Heritage weighs 106.2 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2023 Husqvarna TE 250 Heritage?

The 2023 Husqvarna TE 250 Heritage has a 8.50-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 141-170 km between stops.

Is the 2023 Husqvarna TE 250 Heritage suitable for shorter riders?

The 2023 Husqvarna TE 250 Heritage has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2023 Husqvarna TE 250 Heritage have?

The 2023 Husqvarna TE 250 Heritage uses Single disc. Twin-piston floating calliper, brake disc at the front and Single disc. Single-piston floating calliper, brake disc at the rear.

What tyre sizes does the 2023 Husqvarna TE 250 Heritage use?

The front tyre size on the 2023 Husqvarna TE 250 Heritage is 90/90-21.

What fuel system does the 2023 Husqvarna TE 250 Heritage use?

The 2023 Husqvarna TE 250 Heritage uses Injection. 39mm, providing precise fuelling across the rev range and reliable cold-start behaviour.

Key Specifications

Engine

Single cylinder, two-stroke

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

106.2 kg / 234.1 lbs

Fuel Capacity

8.50 litres / 2.25 US gallons

Full 2023 Husqvarna TE 250 Heritage Specifications

Comments Two engine maps.

Colours White/blue/yellow

Ground Clearance (in.) 14.2 inches

Ground Clearance (mm) 360 mm

Seat Height 950 mm / 37.4 in.

Wheelbase 1482 mm / 58.3 in.

Length 2260 mm / 89.0 in.

Dry Weight 106.2 kg / 234.1 lbs

Fuel Capacity 8.50 litres / 2.25 US gallons

Bore x Stroke (in,) 2.6 x 2.8 inches

Bore x Stroke (mm) 66.4 x 72.0 mm

CO2 59.2 CO2 g/km. (CO2 - Carbon dioxide emission)

Displacement (cc) 249.0 cc

Displacement (ci) 15.19 cubic inches

Engine Type Single cylinder, two-stroke

Fuel System Injection. 39mm

Engine Lubrication Mixture oil lubrication

Fuel Consumption 2.55 litres/100 km (39.2 km/l or 92.24 mpg)

Ignition Continental EMS

Starter Electric

Clutch DDS wet multi-disc clutch, Braktec hydraulics

Final Drive Chain (final drive)

Gearbox 6-speed

Primary Drive X-Ring 5/8 x 1/4´ chain

Frame Type Central double-cradle-type 25CrMo4 steel

Suspension - Front WP XPLOR-USD, Ø 48 mm

Suspension - Rear WP XACT Monoshock with linkage

Rake 26.5°

Trail 107 mm / 4.2 in.

Wheel Travel - Front 300 mm / 11.8 in.

Wheel Travel - Rear 300 mm / 11.8 in.

Brakes - Front Single disc. Twin-piston floating calliper, brake disc

Brakes - Rear Single disc. Single-piston floating calliper, brake disc

Rims Black Alloy Wheels

Tyres - Front 90/90-21

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.