2016 Husqvarna TC250 Specifications

Name: 2016 Husqvarna TC250
Brand: Husqvarna

Cross / motocross • Specs last verified 13 July 2026

No images available

Tap to enlarge

2016 Husqvarna TC250 Overview

For 2016, Husqvarna offers the TC250 as a cross / motocross motorcycle with 249.50 cc on tap. The 2016 Husqvarna TC250 is built around a Single cylinder, two-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation. Internally, bore and stroke are 66.4 x 72 mm. In everyday use, the 2016 TC250 tips the scales at 97.7 kg, carries a 7.50-litre fuel tank, offers a seat height of 992 mm and spans a 1,495 mm wheelbase. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2016 Husqvarna TC250 spec sheet below.

2016 TC250 - Pros & Cons

Strengths

Factory engineering: There's nothing exotic about the 2016 Husqvarna TC250's spec sheet - just solid, proven engineering for what it's meant to do.

Considerations

Tall seat height: A 992 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Modest fuel capacity: A 7.50-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Valve clearance checks

Valve clearances on Double Overhead Cams/Twin Cam (DOHC)-equipped engines like the TC250's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Single disc up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by WP USD ? 48 mm 4CS closed cartridge up front and WP shock absorber with linkage at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the TC250 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The 25CrMo4 steel central-tube frame chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Low-speed handling

The TC250's 97.7 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.

TC250 - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2016 Husqvarna TC250 should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept TC250 settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a TC250's engine - keep to the manufacturer's interval rather than stretching it. The sump holds 0.90 litres, so budget for that volume of quality motorcycle-specific engine oil. Use the viscosity grade the manual specifies, not whatever's on sale.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a TC250's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2016 Husqvarna TC250 - Frequently Asked Questions

What engine does the 2016 Husqvarna TC250 have?

The 2016 Husqvarna TC250 uses a Single cylinder, two-stroke engine with 249.50 cc of displacement.

How much does the 2016 Husqvarna TC250 weigh?

The 2016 Husqvarna TC250 weighs 97.7 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2016 Husqvarna TC250?

The 2016 Husqvarna TC250 has a 7.50-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 125-150 km between stops.

Is the 2016 Husqvarna TC250 suitable for shorter riders?

The 2016 Husqvarna TC250 has a seat height of 992 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2016 Husqvarna TC250 have?

The 2016 Husqvarna TC250 uses Single disc at the front and Single disc at the rear.

What tyre sizes does the 2016 Husqvarna TC250 use?

The 2016 Husqvarna TC250 runs 80/100-21 front and 120/90-19 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

How much oil does the 2016 Husqvarna TC250 take?

The 2016 Husqvarna TC250 takes 0.90 litres of engine oil at a full oil and filter change. Always verify against the dipstick or sight glass after filling.

Husqvarna TC250 Spec Evolution

The Husqvarna TC250 was produced across 18 model years (2002-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2002	2004	2005	2006	2007	2008	2010	2011	2012	2014	2016	2017	2018	2019	2020	2021	2022	2023
Wet Weight	-	110.4 kg / 243.4 lbs	110.5 kg / 243.6 lbs	-	-	-	-	118.8 kg / 262.0 lbs	277.0 kg / 610.7 lbs	-	-	-	-	-	-	-	-	-
Dry Weight	104 kg / 229.3 lbs	-	-	95.3 kg / 210.2 lbs	95.3 kg / 210.2 lbs	95.3 kg / 210.2 lbs	95.3 kg / 210.2 lbs	-	100 kg / 220.5 lbs	97.8 kg / 215.6 lbs	97.7 kg / 215.4 lbs	97.7 kg / 215.4 lbs	97.7 kg / 215.4 lbs	96 kg / 211.6 lbs	96 kg / 211.6 lbs	96 kg / 211.6 lbs	96 kg / 211.6 lbs	99.6 kg / 219.6 lbs
Engine Detail	-	-	-	-	-	-	-	-	Titanium valves in radial arrangement	Reed valves	Reed valves	Reed valves	-	-	-	Counter balancer shaft	Counter balancer shaft	Counter balancer shaft
Engine Type	Single cylinder	Single cylinder	Single cylinder	Single cylinder	Single cylinder, four-stroke	Single cylinder	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke	Single cylinder, two-stroke
Seat Height	910 mm / 35.8 in.	965 mm / 38.0 in.	980 mm / 38.6 in.	-	-	968 mm / 38.1 in.	968 mm / 38.1 in.	660 mm / 26.0 in.	985 mm / 38.8 in.	992 mm / 39.1 in.	992 mm / 39.1 in.	992 mm / 39.1 in.	992 mm / 39.1 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	939 mm / 37.0 in.
Fuel Capacity	8.00 litres / 2.11 gallons	7.70 litres / 2.03 gallons	7.70 litres / 2.03 gallons	-	-	-	7.00 litres / 1.85 gallons	7.00 litres / 1.85 gallons	6.47 litres / 1.71 gallons	7.50 litres / 1.98 gallons	7.50 litres / 1.98 gallons	7.00 litres / 1.85 gallons	7.00 litres / 1.85 gallons	8.00 litres / 2.11 US gallons	8.00 litres / 2.11 US gallons	8.00 litres / 2.11 US gallons	8.00 litres / 2.11 US gallons	7.20 litres / 1.90 US gallons
Oil Capacity (Quarts)	-	-	-	-	-	-	-	-	0.06 quarts	0.06 quarts	0.06 quarts	0.06 quarts	0.06 quarts	0.95 US quarts	0.95 US quarts	0.95 US quarts	0.95 US quarts	0.95 US quarts
Ground Clearance (mm)	365 mm	335 mm	335 mm	-	-	-	-	99 mm	325 mm	385 mm	385 mm	385 mm	385 mm	375 mm	375 mm	375 mm	375 mm	346 mm

Key Specifications

Engine

Single cylinder, two-stroke

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

97.7 kg / 215.4 lbs

Fuel Capacity

7.50 litres / 1.98 gallons

Full 2016 Husqvarna TC250 Specifications

Warranty 2 Years

Ground Clearance (in.) 15.2 inches

Ground Clearance (mm) 385 mm

Seat Height 992 mm / 39.1 in.

Wheelbase 1,495 mm / 58.9 in.

Oil Capacity (l) 0.90 litres

Oil Capacity (Quarts) 0.06 quarts

Dry Weight 97.7 kg / 215.4 lbs

Fuel Capacity 7.50 litres / 1.98 gallons

Bore x Stroke (in,) 2.6 x 2.8 inches

Bore x Stroke (mm) 66.4 x 72.0 mm

Displacement (cc) 249.50 cc

Displacement (ci) 15.22 cubic inches

Engine Type Single cylinder, two-stroke

Fuel Control Double Overhead Cams/Twin Cam (DOHC)

Engine Detail Reed valves

Ignition Kokusan

Starter Kick

Clutch Wet, DDS multi-disc clutch, Brembo hydraulics

Final Drive Chain

Gearbox 5-speed

Frame Type 25CrMo4 steel central-tube frame

Suspension - Front WP USD ? 48 mm 4CS closed cartridge

Suspension - Rear WP shock absorber with linkage

Rake 26.5°

Wheel Travel - Front 300 mm / 11.8 in.

Wheel Travel - Rear 317 mm / 12.5 in.

Brakes - Front Diameter (in.) 10.2 inches

Brakes - Front Diameter (mm) 260 mm

Brakes - Rear Diameter (in.) 7.9 inches

Brakes - Rear Diameter (mm) 200 mm

Brakes - Front Single disc

Brakes - Rear Single disc

Tyres - Front 80/100-21

Tyres - Rear 120/90-19

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.