2023 Husqvarna FE 501 Heritage Specifications

Name: 2023 Husqvarna FE 501 Heritage
Brand: Husqvarna

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2023 Husqvarna FE 501 Heritage Overview

For 2023, Husqvarna offers the FE 501 Heritage as an enduro / off-road motorcycle with 510.9 cc on tap. The 2023 Husqvarna FE 501 Heritage is built around a Single cylinder, four-stroke engine running Single Overhead Cams (SOHC) valve actuation, a compression ratio of 12.8:1. Internally, bore and stroke are 95 x 72 mm. In everyday use, the 2023 FE 501 Heritage tips the scales at 108.4 kg, carries a 9-litre fuel tank, offers a seat height of 950 mm and spans a 1482 mm wheelbase. That's roughly 90.4 kg lighter than the average enduro / off-road motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2023 Husqvarna FE 501 Heritage spec sheet below.

2023 FE 501 Heritage - Pros & Cons

Strengths

Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.

Considerations

Tall seat height: A 950 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Modest fuel capacity: A 9-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling on the FE 501 Heritage comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Valve clearance checks

Valve clearances on Single Overhead Cams (SOHC)-equipped engines like the FE 501 Heritage's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Single disc. Wave disk. up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by WP XPLOR-USD, Ø 48 mm up front and WP XACT Monoshock with linkage at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the FE 501 Heritage means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Central double-cradle-type 25CrMo4 steel chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Low-speed handling

The FE 501 Heritage's 108.4 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.

FE 501 Heritage - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2023 Husqvarna FE 501 Heritage should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept FE 501 Heritage settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a FE 501 Heritage's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the FE 501 Heritage's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a FE 501 Heritage's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2023 Husqvarna FE 501 Heritage - Frequently Asked Questions

What engine does the 2023 Husqvarna FE 501 Heritage have?

The 2023 Husqvarna FE 501 Heritage uses a Single cylinder, four-stroke engine with 510.9 cc of displacement.

How much does the 2023 Husqvarna FE 501 Heritage weigh?

The 2023 Husqvarna FE 501 Heritage weighs 108.4 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2023 Husqvarna FE 501 Heritage?

The 2023 Husqvarna FE 501 Heritage has a 9-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 150-180 km between stops.

Is the 2023 Husqvarna FE 501 Heritage suitable for shorter riders?

The 2023 Husqvarna FE 501 Heritage has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2023 Husqvarna FE 501 Heritage have?

The 2023 Husqvarna FE 501 Heritage uses Single disc. Wave disk. at the front and Single disc. Wave disk. at the rear.

What tyre sizes does the 2023 Husqvarna FE 501 Heritage use?

The front tyre size on the 2023 Husqvarna FE 501 Heritage is 90/90-21.

What fuel system does the 2023 Husqvarna FE 501 Heritage use?

The 2023 Husqvarna FE 501 Heritage uses Injection, providing precise fuelling across the rev range and reliable cold-start behaviour.

Key Specifications

Engine

Single cylinder, four-stroke

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

108.4 kg / 239.0 lbs

Fuel Capacity

9.00 litres / 2.38 US gallons

Full 2023 Husqvarna FE 501 Heritage Specifications

Comments 2 engine maps. Traction control.

Colours White/blue/yellow

Ground Clearance (in.) 14.2 inches

Ground Clearance (mm) 360 mm

Seat Height 950 mm / 37.4 in.

Wheelbase 1482 mm / 58.3 in.

Dry Weight 108.4 kg / 239.0 lbs

Fuel Capacity 9.00 litres / 2.38 US gallons

Stroke 4-stroke

Fuel Control Single Overhead Cams (SOHC)

Engine Type Single cylinder, four-stroke

Displacement (ci) 31.18 cubic inches

Displacement (cc) 510.9 cc

Bore x Stroke (in,) 3.7 x 2.8 inches

Bore x Stroke (mm) 95.0 x 72.0 mm

CO2 84.0 CO2 g/km. (CO2 - Carbon dioxide emission)

Engine Detail Titanium valves

Fuel System Injection

Compression Ratio 12.8:1

Fuel Consumption 3.62 litres/100 km (27.6 km/l or 64.98 mpg)

Ignition Hitachi Astemo EMS

Starter Electric

Valve System 4

Clutch DDS wet multi-disc clutch, Braktec hydraulics

Final Drive Chain (final drive)

Gearbox 6-speed

Primary Drive X-ring 5/8 x 1/4 in chain

Frame Type Central double-cradle-type 25CrMo4 steel

Suspension - Front WP XPLOR-USD, Ø 48 mm

Suspension - Rear WP XACT Monoshock with linkage

Rake 26.5°

Wheel Travel - Front 300 mm / 11.8 in.

Wheel Travel - Rear 300 mm / 11.8 in.

Brakes - Front Single disc. Wave disk.

Brakes - Rear Single disc. Wave disk.

Rims Excel rims. Michelin Enduro tyres

Tyres - Front 90/90-21

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.