2010 Honda CBR600RR ABS Specifications

Name: 2010 Honda CBR600RR ABS
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2010 Honda CBR600RR ABS Overview

For 2010, Honda offers the CBR600RR ABS as a sport motorcycle with 599 cc on tap. The 2010 Honda CBR600RR ABS is built around an In-line four, four-stroke engine running DOHC valve actuation, a compression ratio of 12.2:1. Internally, bore and stroke are 67 x 42.5 mm. In everyday use, the 2010 CBR600RR ABS tips the scales at 196 kg, carries an 18.16-litre fuel tank, offers a seat height of 820 mm and spans a 1,369 mm wheelbase. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2010 Honda CBR600RR ABS spec sheet below.

2010 Honda CBR600RR ABS compared with other bikes in the Sport category

Measured against other bikes in the Sport category in our database (up to 2003 models, one entry per model), the 2010 Honda CBR600RR ABS comes out as follows.

With 820 mm, the CBR600RR ABS has the joint 412th tallest seat height of 1607 bikes in the Sport category.
Engine displacement of 599 cc is smaller than that of 1249 of the other 2002 bikes in the Sport category.
Narrowing the field to the 700 models within five model years of it, the seat height of 820 mm is taller than that of 444 of the other 699.

Versus the 2009 model

The figures we track are unchanged from the 2009 model: wet weight, displacement and seat height all match.

2010 CBR600RR ABS - Pros & Cons

Strengths

Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
Strong front braking: The double disc front brake bites hard and stays consistent - a solid foundation whether it's stock or upgraded with braided lines.
ABS fitted: With ABS on board, hard braking on a damp or gravelly surface is far less likely to end in a locked wheel.
Large fuel range: With an 18.16-litre tank, this isn't a bike you'll be stopping for fuel every hour - a real asset on longer trips.

Considerations

Tall seat height: An 820 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling on the CBR600RR ABS comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Valve clearance checks

Valve clearances on DOHC-equipped engines like the CBR600RR ABS's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Double disc with dual radial-mounted four-piston calipers with 310mm discs; Honda Combined ABS up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by 41mm inverted HMAS cartridge fork with spring-preload, rebound and compression damping adjustability up front and Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the CBR600RR ABS means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

CBR600RR ABS - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2010 Honda CBR600RR ABS with its 599 cc sport should cover the same ground every time: service history, drivetrain condition, and any oil seepage around the casings. This model runs chain final drive, so check chain slack and sprocket tooth profile specifically - a worn sprocket is a cheaper fix now than after it's chewed up the next chain. Now 16 years old, this sport is as likely to show age-related wear (perished rubber, seized fasteners, degraded seals) as mileage-related wear. Start it from cold if you can - a well-kept CBR600RR ABS settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for the CBR600RR ABS's 599 cc in-line four, four-stroke - keep to the manufacturer's interval rather than stretching it. With a 12.2:1 compression ratio, running the octane grade specified in the manual matters more than on a lower-compression engine. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the CBR600RR ABS's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a CBR600RR ABS's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2010 Honda CBR600RR ABS - Frequently Asked Questions

What engine does the 2010 Honda CBR600RR ABS have?

The 2010 Honda CBR600RR ABS uses an In-line four, four-stroke engine with 599 cc of displacement.

How much does the 2010 Honda CBR600RR ABS weigh?

The 2010 Honda CBR600RR ABS weighs 196 kg. This is the manufacturer's wet figure.

What is the fuel tank capacity of the 2010 Honda CBR600RR ABS?

The 2010 Honda CBR600RR ABS has an 18.16-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 302-363 km between stops.

Is the 2010 Honda CBR600RR ABS suitable for shorter riders?

The 2010 Honda CBR600RR ABS has a seat height of 820 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2010 Honda CBR600RR ABS have?

The 2010 Honda CBR600RR ABS uses double disc with dual radial-mounted four-piston calipers with 310mm discs; Honda Combined ABS at the front and single disc with single 220mm disc; Honda Combined ABS at the rear.

What tyre sizes does the 2010 Honda CBR600RR ABS use?

The 2010 Honda CBR600RR ABS runs 120/70-ZR17 front and 180/55-ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What fuel system does the 2010 Honda CBR600RR ABS use?

The 2010 Honda CBR600RR ABS uses Injection. Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors, providing precise fuelling across the rev range and reliable cold-start behaviour.

Honda CBR600RR ABS Spec Evolution

The Honda CBR600RR ABS was produced across 10 model years (2009-2020). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2009	2010	2011	2014	2015	2016	2017	2018	2019	2020
Wet Weight	196.0 kg / 432.0 lbs	196.0 kg / 432.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	196.9 kg / 434.0 lbs	196.9 kg / 434.0 lbs	186.0 kg / 410.0 lbs
Engine Type	In-line four	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke
Seat Height	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	823 mm / 32.4 in.	823 mm / 32.4 in.	823 mm / 32.4 in.	823 mm / 32.4 in.
Fuel Capacity	18.16 litres / 4.80 gallons	18.16 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.00 litres / 4.76 gallons	18.00 litres / 4.76 gallons	18.00 litres / 4.76 US gallons	18.00 litres / 4.76 US gallons
Ground Clearance (mm)	-	-	127 mm	140 mm	-	137 mm	137 mm	-	135 mm	135 mm
CO2	-	132.9 CO	133.2 CO	58.5 CO2 g/km. (CO2 - Carbon dioxide emission)	-	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)
Comments	-	-	-	Model ID: CBR600RA	Model ID: CBR600RA. Electronic Steering Damper.	Model ID: CBR600RA. Electronic Steering Damper.	Model ID: CBR600RA. Electronic Steering Damper.	Model ID: CBR600RA. Electronic Steering Damper.	Model ID: CBR600RA. Electronic Steering Damper.	Model ID: CBR600RR
Ground Clearance (in.)	-	-	5.0 inches	5.5 inches	-	5.4 inches	5.4 inches	-	5.3 inches	5.3 inches

Key Specifications

Engine

In-line four, four-stroke

Power

Not recorded

Torque

Not recorded

Top Speed

Not recorded

Weight

196.0 kg / 432.0 lbs

Fuel Capacity

18.16 litres / 4.80 gallons

Full 2010 Honda CBR600RR ABS Specifications

Colours Red/Black

Seat Height 820 mm / 32.3 in.

Wheelbase 1,369 mm / 53.9 in.

Fuel Capacity 18.16 litres / 4.80 gallons

Wet Weight 196.0 kg / 432.0 lbs

CO2 132.9 CO

Displacement (cc) 599.00 cc

Displacement (ci) 36.55 cubic inches

Engine Type In-line four, four-stroke

Fuel Control DOHC

Bore x Stroke (in,) 2.6 x 1.7 inches

Bore x Stroke (mm) 67.0 x 42.5 mm

Fuel System Injection. Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors

Compression Ratio 12.2:1

Fuel Consumption 5.73 litres/100 km (17.5 km/l or 41.05 mpg)

Ignition Computer-controlled digital transistorized with three-dimensional mapping

Starter Electric

Valve System 4

Final Drive Chain

Gearbox 6-speed

Suspension - Front 41mm inverted HMAS cartridge fork with spring-preload, rebound and compression damping adjustability

Suspension - Rear Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability

Rake 23.5°

Trail 98 mm / 3.8 in.

Wheel Travel - Front 119 mm / 4.7 in.

Wheel Travel - Rear 130 mm / 5.1 in.

Brakes - Front Diameter (in.) 12.2 inches

Brakes - Front Diameter (mm) 310 mm

Brakes - Rear Diameter (in.) 8.7 inches

Brakes - Rear Diameter (mm) 220 mm

Brakes - Front Double disc. Dual radial-mounted four-piston calipers with 310mm discs; Honda Combined ABS

Brakes - Rear Single disc. Single 220mm disc; Honda Combined ABS

Tyres - Front 120/70-ZR17

Tyres - Rear 180/55-ZR17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.