2022 Honda CBR1000RR-R Fireblade SP Specifications

Name: 2022 Honda CBR1000RR-R Fireblade SP
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2022 Honda CBR1000RR-R Fireblade SP Overview

Honda CBR1000RR-R Fireblade SP is a sport motorcycle, displacing 999.9 cc. Power comes from a Four stroke, transverse 4 cylinder, DOHC, 4 valves per cylinder engine, a compression ratio of 13.4:1. On the performance side, it delivers 215 hp @ 14500 of peak power and 113 Nm @ 12500 of torque. On the road, the 2022 CBR1000RR-R Fireblade SP tips the scales at 201 kg, carries a 16-litre fuel tank, offers a seat height of 828 mm and spans a mm wheelbase. The full 2022 Honda CBR1000RR-R Fireblade SP spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2022 CBR1000RR-R Fireblade SP - Pros & Cons

Strengths

Strong power output: With 215 hp @ 14500 and 113 Nm @ 12500 of torque on tap, the CBR1000RR-R Fireblade SP is no slouch for its class.
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.

Considerations

Tall seat height: At 828 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.

Wear Points & Servicing Notes

Cooling system servicing

CBR1000RR-R Fireblade SP's Liquid cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Fuelling & injector care

The Programmed Dual Stage Fuel Injection (PGM-DSFI) with 52mm throttle bodies on the CBR1000RR-R Fireblade SP needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.

Brake disc and pad wear

Braking up front comes from 2x 330mm discs with radially mounted 4-piston Brembo Stylema calipers - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The CBR1000RR-R Fireblade SP's suspension runs Öhlins NPX S-EC 43mm telescopic fork with preload, compression and rebound adjustments at the front. The rear uses Öhlins TTX36 S-EC Pro-Link swingarm with preload, compression and rebound damping. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The CBR1000RR-R Fireblade SP uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.

Frame & chassis check

Built around a Twin-spar aluminum, the CBR1000RR-R Fireblade SP's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

CBR1000RR-R Fireblade SP - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2022 Honda CBR1000RR-R Fireblade SP, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy CBR1000RR-R Fireblade SP should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a CBR1000RR-R Fireblade SP's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Fuel system care

Fuel injection on the CBR1000RR-R Fireblade SP needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.

2022 Honda CBR1000RR-R Fireblade SP - Frequently Asked Questions

What engine does the 2022 Honda CBR1000RR-R Fireblade SP have?

The 2022 Honda CBR1000RR-R Fireblade SP uses a Four stroke, transverse 4 cylinder, DOHC, 4 valves per cylinder engine with 999.9 cc of displacement. It is liquid cooled.

How much does the 2022 Honda CBR1000RR-R Fireblade SP weigh?

The 2022 Honda CBR1000RR-R Fireblade SP weighs 201 kg. This is the manufacturer's wet figure.

How much power does the 2022 Honda CBR1000RR-R Fireblade SP make?

The 2022 Honda CBR1000RR-R Fireblade SP produces 215 hp @ 14500 of power and 113 Nm @ 12500 of torque. These are peak figures.

What is the fuel tank capacity of the 2022 Honda CBR1000RR-R Fireblade SP?

The 2022 Honda CBR1000RR-R Fireblade SP has a 16-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 266-320 km between stops.

Is the 2022 Honda CBR1000RR-R Fireblade SP suitable for shorter riders?

The 2022 Honda CBR1000RR-R Fireblade SP has a seat height of 828 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2022 Honda CBR1000RR-R Fireblade SP have?

The 2022 Honda CBR1000RR-R Fireblade SP uses 2x 330mm discs with radially mounted 4-piston Brembo Stylema calipers at the front and Single 220mm disc with 2-piston Brembo caliper at the rear.

What tyre sizes does the 2022 Honda CBR1000RR-R Fireblade SP use?

The 2022 Honda CBR1000RR-R Fireblade SP runs 120/70-ZR17 M/C front and 200/55-ZR17 M/C rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2022 Honda CBR1000RR-R Fireblade SP have?

The 2022 Honda CBR1000RR-R Fireblade SP is fitted with a 6 speed transmission.

Honda CBR1000RR-R Fireblade SP Spec Evolution

The Honda CBR1000RR-R Fireblade SP was produced across 3 model years (2020-2024). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2020	2022	2024
Max Power	215 hp / 160kW @ 14500	215 hp / 160kW @ 14500	215 hp / 160kW @ 14000 rpm
Seat Height	828 mm / 32.6 in	828 mm / 32.6 in	830 mm / 32.6 in
Fuel Capacity	16 Litres / 4.3 US gal	16 Litres / 4.3 US gal	16.5 Litres / 4.3 US gal
Brakes - Front	2x 330mm discs w/ radially mounted 4-piston Brembo Stylema calipers	2x 330mm discs with radially mounted 4-piston Brembo Stylema calipers	2x 330mm discs with radially mounted 4-piston Brembo Stylema R calipers
Wheelbase	1455 mm / 57.3 in	mm / 57.5 in	1461 mm / 57.5 in
Ground Clearance	115 mm / 4.5 in	115 mm / 4.5 in	130 mm / 5.1 in
Brakes - Rear	Single 220mm disc w/ 2-piston Brembo caliper	Single 220mm disc with 2-piston Brembo caliper	Single 220mm disc with 2-piston Brembo caliper
Suspension - Front	43mm Öhlins NPX Smart-EC Front Fork with electronically-controlled preload, compression and rebound adjustments	Öhlins NPX S-EC 43mm telescopic fork with preload, compression and rebound adjustments	Öhlins NPX S-EC3.0 43mm telescopic fork with preload, compression and rebound adjustments

Key Specifications

Engine

Four stroke, transverse 4 cylinder, DOHC, 4 valves per cylinder

Power

215 hp / 160kW @ 14500

Torque

113 Nm / 82.6 lb-ft @ 12500

Top Speed

Not published by manufacturer

Weight

201 kg / 443 lbs

Fuel Capacity

16 Litres / 4.3 US gal

Full 2022 Honda CBR1000RR-R Fireblade SP Specifications

Year 2022

Make Model Honda CBR1000RR-R Fireblade SP

Seat Height 828 mm / 32.6 in

Wheelbase mm / 57.5 in

Ground Clearance 115 mm / 4.5 in

Height 1140 mm / 44.9 in

Length 2100 mm / 82.7 in

Width 745 mm / 29.3 in

Fuel Capacity 16 Litres / 4.3 US gal

Wet Weight 201 kg / 443 lbs

Max Power 215 hp / 160kW @ 14500

Max Torque 113 Nm / 82.6 lb-ft @ 12500

Displacement 999.9 cc / 61 cu-in

Engine Detail Four stroke, transverse 4 cylinder, DOHC, 4 valves per cylinder

Bore x Stroke 81 x 48.5 mm

Compression Ratio 13.4:1

Cooling System Liquid cooled

Exhaust Titanium Akrapovič

Fuel Induction Programmed Dual Stage Fuel Injection (PGM-DSFI) with 52mm throttle bodies, Denso 12-hole injectors

Ignition Digital transistorized with electronic advance

Starter Electric

Battery Capacity 12-6 YTZ7S

Clutch Wet, multiplate hydraulic clutch with assist slipper

Final Drive Chain

Transmission / Drive 6 speed

Frame Type Twin-spar aluminum

Suspension - Front Öhlins NPX S-EC 43mm telescopic fork with preload, compression and rebound adjustments

Suspension - Rear Öhlins TTX36 S-EC Pro-Link swingarm with preload, compression and rebound damping

Rake 24°

Trail 101.6 mm / 4 in

Wheel Travel - Front 125 mm / 4.9 in

Wheel Travel - Rear 143 mm / 5.6 in

Brakes - Front 2x 330mm discs with radially mounted 4-piston Brembo Stylema calipers

Brakes - Rear Single 220mm disc with 2-piston Brembo caliper

ABS 2 Channel

Rims - Front 3.5 x 17

Rims - Rear 6.0 x 17

Tyres - Front 120/70-ZR17 M/C (58W)

Tyres - Rear 200/55-ZR17 M/C (78W)

Wheels Cast aluminum

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.