2015 Honda CBR1000RR ABS Specifications

Name: 2015 Honda CBR1000RR ABS
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2015 Honda CBR1000RR ABS Overview

The 2015 Honda CBR1000RR ABS is a sport motorcycle. Under the tank sits an In-line four, four-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation, a compression ratio of 12.3:1. The bore and stroke measures 76 x 55.1 mm. From a practical standpoint, the 2015 CBR1000RR ABS tips the scales at 200 kg, carries a 17.70-litre fuel tank, offers a seat height of 820 mm and spans a 1,410 mm wheelbase. That's roughly 5.3 kg heavier than the average sport motorcycle in our database. Scroll down for the complete 2015 Honda CBR1000RR ABS spec sheet covering every technical detail from suspension travel to tyre sizes.

2015 Honda CBR1000RR ABS compared with other bikes in the Sport category

Here is how the 2015 Honda CBR1000RR ABS stacks up against other bikes in the Sport category in our database. Each model counts once, using the model year closest to this one, and the comparison covers up to 1607 models.

Seat height of 820 mm is taller than that of 1084 of the other 1606 bikes in the Sport category.
Only 548 of the other 1212 bikes in the Sport category have a heavier wet weight than the 200 kg of the CBR1000RR ABS.
Narrowing the field to the 706 models within five model years of it, the seat height of 820 mm is taller than that of 435 of the other 705.

Versus the 2014 model

The figures we track are unchanged from the 2014 model: wet weight and seat height all match.

2015 CBR1000RR ABS - Pros & Cons

Strengths

Fuel injection: The fuel injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
Strong front braking: The double disc front brake gives excellent stopping power and responds well to aftermarket braided lines.
ABS fitted: Anti-lock braking is standard, adding a real margin of safety on wet roads or in an emergency stop.

Considerations

Tall seat height: The 820 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling comes from fuel injection. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) valve actuation on the CBR1000RR ABS means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.

Brake disc and pad wear

The double disc front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the CBR1000RR ABS runs 43mm inverted Big Piston fork with spring preload, rebound and compression damping adjustability and Unit Pro-Link® Balance Free Rear shock with spring preload, rebound and compression-damping adjustability at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

CBR1000RR ABS - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2015 Honda CBR1000RR ABS sport, start with the basics: check the service book for oil change frequency, inspect the drivetrain for wear, and look for oil seepage around the engine casings and rocker covers. This model runs chain final drive, so check chain slack and sprocket tooth profile specifically - a worn sprocket is a cheaper fix now than after it's chewed up the next chain. Now 11 years old, this sport is as likely to show age-related wear (perished rubber, seized fasteners, degraded seals) as mileage-related wear. A cold start test is invaluable - a well-maintained CBR1000RR ABS should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task for the CBR1000RR ABS's in-line four, four-stroke engine. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. With a 12.3:1 compression ratio, running the octane grade specified in the manual matters more than on a lower-compression engine. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The CBR1000RR ABS's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used CBR1000RR ABS. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.

2015 Honda CBR1000RR ABS - Frequently Asked Questions

What engine does the 2015 Honda CBR1000RR ABS have?

The 2015 Honda CBR1000RR ABS is powered by an In-line four, four-stroke engine.

How much does the 2015 Honda CBR1000RR ABS weigh?

The 2015 Honda CBR1000RR ABS weighs 200 kg. This is the manufacturer's wet figure.

What is the fuel tank capacity of the 2015 Honda CBR1000RR ABS?

The 2015 Honda CBR1000RR ABS has a 17.70-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 295-353 km between stops.

Is the 2015 Honda CBR1000RR ABS suitable for shorter riders?

The 2015 Honda CBR1000RR ABS has a seat height of 820 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2015 Honda CBR1000RR ABS have?

The 2015 Honda CBR1000RR ABS uses double disc with ABS, floating discs, four-piston calipers and Radially mounted at the front and single disc with ABS at the rear.

What tyre sizes does the 2015 Honda CBR1000RR ABS use?

The 2015 Honda CBR1000RR ABS runs 120/70-ZR17 front and 190/50-ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What fuel system does the 2015 Honda CBR1000RR ABS use?

The 2015 Honda CBR1000RR ABS uses Injection. Programmed Dual Stage Fuel Injection (PGM-DSFI) with 46mm throttle bodies, Denso 12-hole injectors, providing precise fuelling across the rev range and reliable cold-start behaviour.

Honda CBR1000RR ABS Spec Evolution

The Honda CBR1000RR ABS was produced across 7 model years (2010-2019). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2010	2011	2014	2015	2016	2018	2019
Wet Weight	209.1 kg / 461.0 lbs	199.1 kg / 439.0 lbs	200.0 kg / 440.9 lbs	200.0 kg / 440.9 lbs	200.0 kg / 440.9 lbs	202.0 kg / 445.3 lbs	196.4 kg / 433.0 lbs
Fuel Capacity	17.78 litres / 4.70 gallons	17.79 litres / 4.70 gallons	17.70 litres / 4.68 gallons	17.70 litres / 4.68 gallons	17.70 litres / 4.68 gallons	17.79 litres / 4.70 gallons	17.79 litres / 4.70 US gallons
Fuel Control	DOHC	DOHC	Double Overhead Cams/Twin Cam (DOHC)	Double Overhead Cams/Twin Cam (DOHC)	Double Overhead Cams/Twin Cam (DOHC)	Double Overhead Cams/Twin Cam (DOHC)	Double Overhead Cams/Twin Cam (DOHC)
Displacement (cc)	999.00 cc	999.00 cc	-	-	999.00 cc	999.00 cc	999.0 cc
Comments	-	-	Model ID: CBR1000RR ABS	Model ID: CBR1000RR ABS	Model ID: CBR1000RR ABS	Model ID: CBR1000RA	Model ID: CBR1000RA
CO2	147.3 CO	147.6 CO	-	-	-	133.2 CO2 g/km. (CO2 - Carbon dioxide emission)	133.2 CO2 g/km. (CO2 - Carbon dioxide emission)
Frame Type	-	Aluminium	-	-	Die-cast twin-spar aluminium frame	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar
Wheelbase	1,407 mm / 55.4 in.	1,407 mm / 55.4 in.	1,410 mm / 55.5 in.	1,410 mm / 55.5 in.	1,410 mm / 55.5 in.	1,410 mm / 55.5 in.	1405 mm / 55.3 in.

Key Specifications

Engine

In-line four, four-stroke

Power

Not recorded

Torque

Not recorded

Top Speed

Not recorded

Weight

200.0 kg / 440.9 lbs

Fuel Capacity

17.70 litres / 4.68 gallons

Full 2015 Honda CBR1000RR ABS Specifications

Comments Model ID: CBR1000RR ABS

Colours Red

Warranty One year. Unlimited milage. Transferable.

Seat Height 820 mm / 32.3 in.

Wheelbase 1,410 mm / 55.5 in.

Height 1,135 mm / 44.7 in.

Length 2,077 mm / 81.8 in.

Width 685 mm / 27.0 in.

Fuel Capacity 17.70 litres / 4.68 gallons

Wet Weight 200.0 kg / 440.9 lbs

Engine Type In-line four, four-stroke

Fuel Control Double Overhead Cams/Twin Cam (DOHC)

Bore x Stroke (in,) 3.0 x 2.2 inches

Bore x Stroke (mm) 76.0 x 55.1 mm

Fuel System Injection. Programmed Dual Stage Fuel Injection (PGM-DSFI) with 46mm throttle bodies, Denso 12-hole injectors

Compression Ratio 12.3:1

Emissions Meets current EPA standards. California version meets current CARB standards and may differ slightly due to emissions equipment.

Fuel Reserve 4.00 litres / 1.06 gallons

Ignition Computer-controlled digital transistorized with 3-D mapping

Starter Electric

Valve System 4

Final Drive Chain

Gearbox 6-speed

Primary Drive #530 O-ring-sealed chain

Suspension - Front 43mm inverted Big Piston fork with spring preload, rebound and compression damping adjustability

Suspension - Rear Unit Pro-Link® Balance Free Rear shock with spring preload, rebound and compression-damping adjustability

Rake 23.0°

Trail 96 mm / 3.8 in.

Wheel Travel - Front 109 mm / 4.3 in.

Wheel Travel - Rear 137 mm / 5.4 in.

Instrumentation LCD Instrumentation.

Brakes - Front Diameter (in.) 12.6 inches

Brakes - Front Diameter (mm) 320 mm

Brakes - Rear Diameter (in.) 8.7 inches

Brakes - Rear Diameter (mm) 220 mm

Brakes - Front Double disc. ABS. Floating discs. Four-piston calipers. Radially mounted.

Brakes - Rear Single disc. ABS.

Tyres - Front 120/70-ZR17

Tyres - Rear 190/50-ZR17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.