No images available
Tap to enlarge
2012 Honda CBF1000F Overview
Honda CBF1000F is a sport motorcycle, displacing 998 cc. Power comes from an In-line four, four-stroke engine running DOHC valve actuation. Bore and stroke come in at 75 x 56.5 mm. On the performance side, it delivers 95 Nm @ 6500 of torque. On the road, the 2012 CBF1000F tips the scales at 245 kg, carries a 20-litre fuel tank, offers a seat height of 795 mm and spans a 1,483 mm wheelbase. That's roughly 42.3 kg heavier than the average sport motorcycle in our database. The full 2012 Honda CBF1000F spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2012 CBF1000F - Pros & Cons
Strengths
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
-
⛽
Large fuel range: A 20-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.
Considerations
-
⚙️
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.
Wear Points & Servicing Notes
Fuelling & injector care
The fuel injection on the CBF1000F needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Valve clearance checks
With DOHC valve gear, the CBF1000F needs periodic clearance checks; caught early they're a cheap adjustment, left unchecked they accelerate valve seat wear.
Brake disc and pad wear
Braking up front comes from Double disc. 3-piston callipers, ABS floating rotors and sintered metal pads - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.
Suspension condition on used examples
The CBF1000F's suspension runs 41 mm cartridge-type telescopic fork at the front. The rear uses Pro-Link with gas-charges HMAS damper. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The CBF1000F uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.
Frame & chassis check
Built around a Lightweight aluminium, the CBF1000F's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Handling the weight at a standstill
245 kg puts the CBF1000F toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.
CBF1000F - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2012 Honda CBF1000F, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy CBF1000F should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a CBF1000F's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the CBF1000F needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
Valve clearance service
Valve clearances are easy to overlook on a used CBF1000F since a bike out of spec doesn't always feel obviously wrong - but the wear it causes is real. Ask the seller for documentation before assuming it's been done.
2012 Honda CBF1000F - Frequently Asked Questions
What engine does the 2012 Honda CBF1000F have?
The 2012 Honda CBF1000F uses an In-line four, four-stroke engine with 998 cc of displacement.
How much does the 2012 Honda CBF1000F weigh?
The 2012 Honda CBF1000F weighs 245 kg. This is the manufacturer's wet figure.
How much power does the 2012 Honda CBF1000F make?
The 2012 Honda CBF1000F produces 95 Nm @ 6500 of torque.
What is the fuel tank capacity of the 2012 Honda CBF1000F?
The 2012 Honda CBF1000F has a 20-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 333-400 km between stops.
Is the 2012 Honda CBF1000F suitable for shorter riders?
The 2012 Honda CBF1000F has a seat height of 795 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2012 Honda CBF1000F have?
The 2012 Honda CBF1000F uses Double disc. 3-piston callipers, ABS floating rotors and sintered metal pads at the front and Single disc. 3-piston calliper, ABS and sintered pads at the rear.
What tyre sizes does the 2012 Honda CBF1000F use?
The 2012 Honda CBF1000F runs 120/70-ZR17 front and 160/60-ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
Honda CBF1000F Spec Evolution
The Honda CBF1000F was produced across 4 model years (2007-2017). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2007 |
2012 |
2014 |
2017 |
| Wet Weight |
- |
245.0 kg / 540.1 lbs |
250.0 kg / 551.2 lbs |
242.0 kg / 533.5 lbs |
| Dry Weight |
220 kg / 485.0 lbs |
88 kg / 194.0 lbs |
- |
- |
| Engine Type |
In-line four |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
| Fuel Capacity |
19.00 litres / 5.02 gallons |
20.00 litres / 5.28 gallons |
19.00 litres / 5.02 gallons |
20.00 litres / 5.28 gallons |
| Fuel Control |
DOHC |
DOHC |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
| Frame Type |
- |
Lightweight aluminium |
Steel |
Mono-backbone, rectangular-section steel tube |
| Brakes - Front |
Double disc |
Double disc. 3-piston callipers, ABS floating rotors and sintered metal pads |
Double disc. 2-piston caliper, sintered metal pads and Combined ABS |
Double disc. Floating discs. Hydraulic. Four-piston calipers. |
| Wheelbase |
1,483 mm / 58.4 in. |
1,483 mm / 58.4 in. |
1,483 mm / 58.4 in. |
1,480 mm / 58.3 in. |
Key Specifications
Engine
In-line four, four-stroke
Power
Not published by manufacturer
Torque
95.00 Nm (9.7 kgf-m or 70.1 ft.lbs) @ 6500
Top Speed
Not published by manufacturer
Weight
245.0 kg / 540.1 lbs
Fuel Capacity
20.00 litres / 5.28 gallons
Advertisement
Full 2012 Honda CBF1000F Specifications
Comments
French brand.
Colours
Red, black, white
Ground Clearance (mm)
135 mm
Ground Clearance (in.)
5.3 inches
Seat Height
795 mm / 31.3 in.
Wheelbase
1,483 mm / 58.4 in.
Height
1,150 mm / 45.3 in.
Length
2,176 mm / 85.7 in.
Width
685 mm / 27.0 in.
Dry Weight
88 kg / 194.0 lbs
Fuel Capacity
20.00 litres / 5.28 gallons
Wet Weight
245.0 kg / 540.1 lbs
Fuel Control
DOHC
Engine Type
In-line four, four-stroke
Displacement (ci)
60.90 cubic inches
Displacement (cc)
998.00 cc
Bore x Stroke (mm)
75.0 x 56.5 mm
Bore x Stroke (in,)
3.0 x 2.2 inches
Fuel System
Injection. PGM-FI
Exhaust
Single muffler
Ignition
Computer-controlled digital transistorised with electronic advance
Starter
Electric
Valve System
4
Clutch
Wet multiplate
Final Drive
Chain
Gearbox
6-speed
Primary Drive
#530 O-ring sealed chain
Frame Type
Lightweight aluminium
Suspension - Front
41 mm cartridge-type telescopic fork
Suspension - Rear
Pro-Link with gas-charges HMAS damper
Seat
Dual
Wheel Travel - Front
120 mm / 4.7 in.
Wheel Travel - Rear
120 mm / 4.7 in.
Brakes - Front Diameter (in.)
11.7 inches
Brakes - Front Diameter (mm)
296 mm
Brakes - Rear Diameter (in.)
9.4 inches
Brakes - Rear Diameter (mm)
240 mm
Brakes - Front
Double disc. 3-piston callipers, ABS floating rotors and sintered metal pads
Brakes - Rear
Single disc. 3-piston calliper, ABS and sintered pads
Rims
Hollow-section 6-spoke cast aluminium
Tyres - Front
120/70-ZR17
Tyres - Rear
160/60-ZR17
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement