![]()
No images available
Tap to enlarge
![]()
2000 Aprilia RS 250 Overview
The 2000 Aprilia RS 250 is a sport motorcycle built around 249 cc of displacement. Under the tank sits a Two stroke, 90° V twin-cylinder, with laminar suction and exhaust valve. Separate lubrication with variable automatic mixer engine, a compression ratio of 12.0:1. 2000 Aprilia RS 250 delivers 52.9 kW @ 11900 rpm of peak power and 40 Nm @ 10750 rpm of torque. The factory-quoted top speed stands at 209.5 km/h, making it a capable performer in its class. From a practical standpoint, the 2000 RS 250 tips the scales at 167 kg, carries a 16.5-litre fuel tank, offers a seat height of 810 mm and spans a 1370 mm wheelbase. That's roughly 35.7 kg lighter than the average sport motorcycle in our database. Scroll down for the complete 2000 Aprilia RS 250 spec sheet covering every technical detail from suspension travel to tyre sizes.
2000 RS 250 - Pros & Cons
Strengths
-
⚡
Strong power output: 2000 Aprilia RS 250 makes 52.9 kW @ 11900 rpm with 40 Nm @ 10750 rpm of torque - competitive figures for its class.
Considerations
-
🔧
Carburetor fuelling: Carbureted engines need occasional jetting attention and can be reluctant in cold weather or at altitude compared to modern fuel-injected alternatives.
-
⚙️
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.
Wear Points & Servicing Notes
Cooling system servicing
The Liquid cooled system on the RS 250 needs a coolant change roughly every two years (or per the service schedule) - skipping it lets the coolant turn acidic and corrode the aluminium water passages over time.
Carburetor maintenance
The RS 250 uses carburetion rather than fuel injection, which means jetting is altitude- and temperature-sensitive and benefits from a clean-and-rejet after extended storage or an exhaust change.
Brake disc and pad wear
The 2 x Ø298 mm discs, 4 piston calipers front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.
Suspension condition on used examples
Up front, the RS 250 runs ø40 mm Inverted fork with adjustable rebound and compression damping and Magnesium alloy swingarm. Monoshock with resevoir, adjustable extension, compression and spring preloading at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.
Final drive maintenance
Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.
RS 250 - Buying & Maintenance Guide
What to check before buying
When inspecting a used 2000 Aprilia RS 250, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained RS 250 should fire up cleanly and settle to a smooth idle within a few seconds.
Oil and filter changes
Regular oil changes are the single most important maintenance task on any RS 250. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.
Carburetor upkeep
Keep the carburetors clean and free of deposits. If the RS 250 has been stored, strip and clean the carb float bowls before attempting to start it. Pilot jets are the first to block and the last to be checked - always include them in any carb rebuild.
2000 Aprilia RS 250 - Frequently Asked Questions
What engine does the 2000 Aprilia RS 250 have?
The 2000 Aprilia RS 250 uses a Two stroke, 90° V twin-cylinder, with laminar suction and exhaust valve. Separate lubrication with variable automatic mixer engine with 249 cc of displacement. It is liquid cooled.
What is the top speed of the 2000 Aprilia RS 250?
The 2000 Aprilia RS 250 has a factory-quoted top speed of 209.5 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2000 Aprilia RS 250 weigh?
The 2000 Aprilia RS 250 weighs 167 kg. This is the manufacturer's wet figure.
How much power does the 2000 Aprilia RS 250 make?
The 2000 Aprilia RS 250 produces 52.9 kW @ 11900 rpm of power and 40 Nm @ 10750 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2000 Aprilia RS 250?
The 2000 Aprilia RS 250 has a 16.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 275-330 km between stops.
Is the 2000 Aprilia RS 250 suitable for shorter riders?
The 2000 Aprilia RS 250 has a seat height of 810 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2000 Aprilia RS 250 have?
The 2000 Aprilia RS 250 uses 2 x Ø298 mm discs, 4 piston calipers at the front and Single Ø220 mm disc, 2 piston caliper at the rear.
What tyre sizes does the 2000 Aprilia RS 250 use?
The 2000 Aprilia RS 250 runs 120/60-17 front and 150/60-17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2000 Aprilia RS 250 have?
The 2000 Aprilia RS 250 is fitted with a 6 Speed, direct drive transmission.
Aprilia RS 250 Spec Evolution
The Aprilia RS 250 was produced across 6 model years (1995-2003). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
1995 |
1996 |
1997 |
1998 |
2000 |
2003 |
| Air Filter |
With polyurethane filter element |
With polyurethane filter element |
With polyurethane filter element |
With polyurethane filter element |
Polyurethane filter element |
With polyurethane filter element |
| Tyres - Front |
110/70-17 |
110/70-17 |
110/70-17 |
120/60-17 |
120/60-17 |
120/60-17 |
| Wheels - Front |
3.00 x 17 |
3.00 x 17 |
3.00 x 17 |
3.50 x 17 |
3.50 x 17 |
3.50 x 17 |
Key Specifications
Engine
Two stroke, 90° V twin-cylinder, with laminar suction and exhaust valve. Separate lubrication with variable automatic mixer
Power
52.9 kW / 72.5 hp @ 11900 rpm
Torque
40 Nm / 4.08 kgf-m / 29.5 lb/ft @ 10750 rpm
Top Speed
209.5 km/h / 130.2 mph
Fuel Capacity
16.5 Litres / 4.4 US gal
Advertisement
Full 2000 Aprilia RS 250 Specifications
Make Model
Aprilia RS 250
Seat Height
810 mm / 31.9 in
Wheelbase
1370 mm / 53.9 in
Ground Clearance
135 mm / 5.3 in
Height
1080 mm / 42.5 in
Length
1880 mm / 74.0 in
Turning Circle
4.09 m / 13.4 ft
Width
690 mm / 27.2 in
Dry Weight
141 kg / 309 lbs
Fuel Capacity
16.5 Litres / 4.4 US gal
Wet Weight
167 kg / 368 lbs
Displacement
249 cc / 15.2 cu in
Engine Detail
Two stroke, 90° V twin-cylinder, with laminar suction and exhaust valve. Separate lubrication with variable automatic mixer
Air Filter
Polyurethane filter element
Bore x Stroke
56 x 50.6 mm
Compression Ratio
12.0:1 (+/- 0.7)
Cooling System
Liquid cooled
Fuel Induction
2 x Ø34 mm Mikuni 34 SS flat side carburetors
Fuel Reserve
3.5 Litres / 0.9 US gal
Fuel Type
Lead-free petrol, R.O.N. minimum 95
Ignition
CDI
Lubrication
Oil pump with separate circuit
Starter
Kick
Clutch
Oil bath, multiple-disc, with lever control on handlebars
Final Drive
Chain, sealed, jointless, DID 520 V6
Final Drive Ratio
14:42 (1:3.0)
Gear Ratios
1st 11:27 (1:2.454) / 2nd 16:26 (1:1.625) / 3rd 17:21 (1:1.235) / 4th 22:23 (1:1.045) / 5th 24:22 (1:0.916) / 6th 25:21 (1:0.840)
Gear Shift Pattern
With pedal (L), 1st low, other 5 high
Primary Drive Ratios
23:59 (1:2.565)
Transmission / Drive
6 Speed, direct drive
Suspension - Front
ø40 mm Inverted fork with adjustable rebound and compression damping.
Suspension - Rear
Magnesium alloy swingarm. Monoshock with resevoir, adjustable extension, compression and spring preloading.
Rake
25°
Wheel Travel - Front
120 mm / 4.7 in
Wheel Travel - Rear
130 mm / 5.1 in
2-Stroke Engine Oil
IP MAX 2T COMPETITION, or any high-quality oil meeting the ISO-L-ETC++ or API TC++ specifications
Gearbox Oil Specification
IP FC, SAE 75W-90, or any high-quality oil meeting the API GL-4 specification
Brakes - Front
2 x Ø298 mm discs, 4 piston calipers
Brakes - Rear
Single Ø220 mm disc, 2 piston caliper
Tyres - Front
120/60-17
Tyres - Rear
150/60-17
Wheels - Front
3.50 x 17
Wheels - Rear
4.50 x 17
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement