2020 Yamaha MT-03 vs 2022 Suzuki Gixxer 250
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | - | Sold in Asia. |
| Year | 2020 | - |
| Colours | - | Blue, black |
| Make Model | Yamaha MT-03 | - |
| Dimensions |
| Ground Clearance (in.) | - | 6.5 inches |
| Ground Clearance (mm) | - | 165 mm |
| Seat Height | 779.7 mm / 30.7 in | 800 mm / 31.5 in. |
| Wheelbase | 1379.2 mm / 54.3 in | 1345 mm / 53.0 in. |
| Ground Clearance | 160 mm / 6.2 in | - |
| Height | 1133 mm / 40.7 in | 1035 mm / 40.7 in. |
| Length | 2090 mm / 82.3 in | 2010 mm / 79.1 in. |
| Width | 718.8 mm / 28.3 in | 805 mm / 31.7 in. |
| Weights & Capacities |
| Fuel Capacity | 14 Litres / 3.7 gal | 12.00 litres / 3.17 US gallons |
| Wet Weight | 167 kg / 370 lbs | 156.0 kg / 343.9 lbs |
| Performance |
| Max Power | 30.9 kW 41.4 hp @ 10750 rpm | - |
| Max Torque | 29.6 Nm / 22 lb-ft @ 9000 rpm | 22.2 Nm (2.3 kgf-m or 16.4 ft.lbs) @ 7300 Revolutions" |
| Engine |
| Displacement (ci) | - | 15.19 cubic inches |
| Displacement (cc) | - | 249.0 cc |
| Bore x Stroke (mm) | - | 76.0 x 54.9 mm |
| Bore x Stroke (in,) | - | 3.0 x 2.2 inches |
| Engine Type | - | Single cylinder, four-stroke |
| Fuel Control | - | Single Overhead Cams (SOHC) |
| Displacement | 321 cc / 19.5 cu-in | - |
| Engine Detail | Four stroke, parallel twin cylinder, 4 valve per cylinder | - |
| Fuel System | - | Injection |
| Bore x Stroke | 68.0 x 44.1mm | - |
| Compression Ratio | 11.2:1 | - |
| Cooling System | Liquid cooled | - |
| Engine Lubrication | - | Wet sump |
| Fuel Induction | Electronic Fuel Injection | - |
| Ignition | TCI: Transistor Controlled Ignition | CDI |
| Lubrication | Wet sump | - |
| Starter | Electric | Electric |
| Valve System | - | 4 |
| Drivetrain |
| Clutch | Wet, multiple-disc coil spring | - |
| Final Drive | Chain | Chain (final drive) |
| Gearbox | - | 6-speed |
| Transmission / Drive | Constant Mesh, 6-speed | - |
| Chassis |
| Frame Type | Delta box | - |
| Suspension - Front | 37mm Non-adjustable KYB inverted forks. | Telescopic forks |
| Suspension - Rear | Linkage-assisted spring-preload adjustable KYB shock | Swing Arm, Mono Suspension |
| Rake | 25° | - |
| Trail | 93.9 mm / 3.7 in | - |
| Wheel Travel - Front | 130 mm / 5.1 in | - |
| Wheel Travel - Rear | 124.4 mm / 4.9 in | - |
| Electrical Systems |
| Instrumentation | - | LCD instruments |
| Lighting system | - | LED headlight |
| Wheels & Brakes |
| Brakes - Front | Single 298mm disc, ABS | Single disc. ABS |
| Brakes - Rear | Single 220mm disc. ABS | Single disc. ABS |
| Rims | - | Cast alloy |
| Tyres - Front | 110/70-17 | 110/70-R17 |
| Tyres - Rear | 140/70-17 | - |
Verdict
🏆
Winner on specs
2020 Yamaha MT-03
The 2020 Yamaha MT-03 edges out the 2022 Suzuki Gixxer 250 thanks to its liquid cooling. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 Yamaha MT-03 - Advantages
- 🌡️Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
2022 Suzuki Gixxer 250 - Advantages
- ✓Competitive all-round: The 2022 Suzuki Gixxer 250 matches or exceeds its rival across all measured criteria.
2020 Yamaha MT-03 vs 2022 Suzuki Gixxer 250 - FAQs
What are the engine differences between the 2020 Yamaha MT-03 and 2022 Suzuki Gixxer 250?
The 2020 Yamaha MT-03 uses Four stroke, parallel twin cylinder, 4 valve per cylinder, while the 2022 Suzuki Gixxer 250 is powered by Single cylinder, four-stroke.
Which should I buy, the 2020 Yamaha MT-03 or the 2022 Suzuki Gixxer 250?
Both are strong choices. The 2020 Yamaha MT-03 has the edge in liquid cooling, while the 2022 Suzuki Gixxer 250 offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.