2020 Yamaha MT-03 vs 2019 Kawasaki Z 400 ABS
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | 2020 | - |
| Colours | - | Candy Lime Green/Metallic Spark Black |
| Make Model | Yamaha MT-03 | - |
| Warranty | - | 12 Month Limited Warranty |
| Dimensions |
| Ground Clearance (mm) | - | 145 mm |
| Ground Clearance (in.) | - | 5.7 inches |
| Seat Height | 779.7 mm / 30.7 in | 785 mm / 30.9 in. |
| Wheelbase | 1379.2 mm / 54.3 in | 1369 mm / 53.9 in. |
| Ground Clearance | 160 mm / 6.2 in | - |
| Height | 1133 mm / 40.7 in | 1054 mm / 41.5 in. |
| Length | 2090 mm / 82.3 in | 1989 mm / 78.3 in. |
| Width | 718.8 mm / 28.3 in | 800 mm / 31.5 in. |
| Weights & Capacities |
| Fuel Capacity | 14 Litres / 3.7 gal | 14.00 litres / 3.70 US gallons |
| Wet Weight | 167 kg / 370 lbs | 165.0 kg / 363.8 lbs |
| Performance |
| Top Speed | - | 147.0 km/h / 91.3 mph |
| Max Power | 30.9 kW 41.4 hp @ 10750 rpm | - |
| Max Torque | 29.6 Nm / 22 lb-ft @ 9000 rpm | 38.0 Nm (3.9 kgf-m or 28.0 ft.lbs) @ 8000 Revolutions" |
| Engine |
| Engine Type | - | Twin, four-stroke |
| Fuel Control | - | Overhead Cams (OHC) |
| Bore x Stroke (mm) | - | 70.0 x 51.8 mm |
| Bore x Stroke (in,) | - | 2.8 x 2.0 inches |
| Displacement (cc) | - | 399.0 cc |
| Displacement (ci) | - | 24.35 cubic inches |
| Displacement | 321 cc / 19.5 cu-in | - |
| Engine Detail | Four stroke, parallel twin cylinder, 4 valve per cylinder | - |
| Bore x Stroke | 68.0 x 44.1mm | - |
| Compression Ratio | 11.2:1 | 11.5:1 |
| Cooling System | Liquid cooled | - |
| Fuel Induction | Electronic Fuel Injection | - |
| Ignition | TCI: Transistor Controlled Ignition | - |
| Lubrication | Wet sump | - |
| Starter | Electric | - |
| Valve System | - | 2 |
| Drivetrain |
| Clutch | Wet, multiple-disc coil spring | - |
| Final Drive | Chain | Chain (final drive) |
| Gearbox | - | 5-speed |
| Transmission / Drive | Constant Mesh, 6-speed | - |
| Chassis |
| Frame Type | Delta box | Trellis, high-tensile steel |
| Suspension - Front | 37mm Non-adjustable KYB inverted forks. | Telescopic fork |
| Suspension - Rear | Linkage-assisted spring-preload adjustable KYB shock | Uni-Trak® swingarm |
| Rake | 25° | 24.5° |
| Trail | 93.9 mm / 3.7 in | 94 mm / 3.7 in. |
| Wheel Travel - Front | 130 mm / 5.1 in | 119 mm / 4.7 in. |
| Wheel Travel - Rear | 124.4 mm / 4.9 in | 130 mm / 5.1 in. |
| Wheels & Brakes |
| Brakes - Front | Single 298mm disc, ABS | Single disc |
| Brakes - Rear | Single 220mm disc. ABS | Single disc |
| Tyres - Front | 110/70-17 | 110/70-17M |
| Tyres - Rear | 140/70-17 | - |
Verdict
🏆
Winner on specs
2020 Yamaha MT-03
The 2020 Yamaha MT-03 edges out the 2019 Kawasaki Z 400 ABS thanks to its liquid cooling, fuel injection, greater ground clearance and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 Yamaha MT-03 - Advantages
- 🌡️Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
- 🔧Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.
- 🏔️More ground clearance: 160 mm vs 145 mm - better clearance over rocks and obstacles.
- 🔄More front wheel travel: 130 mm vs 119 mm - greater compliance over rough surfaces.
2019 Kawasaki Z 400 ABS - Advantages
- ✓Competitive all-round: The 2019 Kawasaki Z 400 ABS matches or exceeds its rival across all measured criteria.
2020 Yamaha MT-03 vs 2019 Kawasaki Z 400 ABS - FAQs
What are the engine differences between the 2020 Yamaha MT-03 and 2019 Kawasaki Z 400 ABS?
The 2020 Yamaha MT-03 uses Four stroke, parallel twin cylinder, 4 valve per cylinder, while the 2019 Kawasaki Z 400 ABS is powered by Twin, four-stroke.
Which should I buy, the 2020 Yamaha MT-03 or the 2019 Kawasaki Z 400 ABS?
Both are strong choices. The 2020 Yamaha MT-03 has the edge in liquid cooling and fuel injection, while the 2019 Kawasaki Z 400 ABS offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.